96 Heater Core

bigred96 · 01-25-2006, 05:32 AM

Trying To Remove The Dash To Repalce Heater Core In 96 Jimmy Ive Been Told The Whole Dash Must Be Rem0ved To Do This. Got The Kick Plates Out And The Bolts Holding The Dash At The Bottom Seems To Be Loose At The Bottom But Not Quite There Yet.any Hint On How To Get This Thing Out. The Brackets At The Bottom Seem To Set On Some Kind Of Pins . Do I Need To Take Out The Radio ? Is It Tied Down Behind That?any Help Or Pics Would Be Greatly Appreciated

~~Blazin810~~ · 01-25-2006, 01:48 PM

Use the search button. There is a whole diagram on how to do it.

bigred96 · 01-29-2006, 08:29 PM

Quote: Originally Posted by GMCHIGHSIERRA

Use the search button. There is a whole diagram on how to do it.

THANKS FOR THE HELP PUT IT IN THIS WEEKEND TOOK ABOUT 6 HRS AND ALOTTA SCRAPED KNUCKLES. THANKS AGAIN!

~~Blazin810~~ · 01-30-2006, 12:06 AM

Quote: Originally Posted by bigred96

THANKS FOR THE HELP PUT IT IN THIS WEEKEND TOOK ABOUT 6 HRS AND ALOTTA SCRAPED KNUCKLES. THANKS AGAIN!

No problem. Now I gotta get the ambition to fix mine...and it just snowed again. BRRR!

sockjock · 01-30-2006, 01:26 AM

Just recently had to replace my heater core. What a major pain. The next time I have to do this to one of my blazers I will put some JBweld around the in/out tubes on the heater core. Didn't think of it then and it's too late now. This seems to be a real problem area. Good luck with yours.

Quote: Originally Posted by GMCHIGHSIERRA

No problem. Now I gotta get the ambition to fix mine...and it just snowed again. BRRR!

~~Blazin810~~ · 01-30-2006, 02:25 PM

Quote: Originally Posted by sockjock

Just recently had to replace my heater core. What a major pain. The next time I have to do this to one of my blazers I will put some JBweld around the in/out tubes on the heater core. Didn't think of it then and it's too late now. This seems to be a real problem area. Good luck with yours.

Mine is clogged. JB Weld isn't going to help me here...

sockjock · 01-30-2006, 06:13 PM

Bummer! Time for scraped knuckles.

Quote: Originally Posted by GMCHIGHSIERRA

Mine is clogged. JB Weld isn't going to help me here...

mojo · 05-03-2007, 08:27 PM

Quote: Originally Posted by bigred96

Trying To Remove The Dash To Repalce Heater Core In 96 Jimmy Ive Been Told The Whole Dash Must Be Rem0ved To Do This. Got The Kick Plates Out And The Bolts Holding The Dash At The Bottom Seems To Be Loose At The Bottom But Not Quite There Yet.any Hint On How To Get This Thing Out. The Brackets At The Bottom Seem To Set On Some Kind Of Pins . Do I Need To Take Out The Radio ? Is It Tied Down Behind That?any Help Or Pics Would Be Greatly Appreciated

Did you find a link ( Or can you give me a url) to "How to remove the dash to get to Heater Core". My 96 Blazer Heater core is shot and & would like to change it myself. Thanks

96blazer · 05-03-2007, 08:39 PM

Quote: Originally Posted by mojo

Did you find a link ( Or can you give me a url) to "How to remove the dash to get to Heater Core". My 96 Blazer Heater core is shot and & would like to change it myself. Thanks

http://www.s10forum.com/forum/f136/h...cement-126737/

mojo · 05-04-2007, 02:27 PM

Quote: Originally Posted by 96blazer

http://www.s10forum.com/forum/f136/h...cement-126737/

Thanks for the link. Its an excellent write up.

Another one of many repaires I'll be soon adding to its journal.

01-25-2006, 05:32 AM	#1
bigred96 Registered User Join Date: Jan 2006 Posts: 8 Location: User is: OffLine	96 Heater Core Trying To Remove The Dash To Repalce Heater Core In 96 Jimmy Ive Been Told The Whole Dash Must Be Rem0ved To Do This. Got The Kick Plates Out And The Bolts Holding The Dash At The Bottom Seems To Be Loose At The Bottom But Not Quite There Yet.any Hint On How To Get This Thing Out. The Brackets At The Bottom Seem To Set On Some Kind Of Pins . Do I Need To Take Out The Radio ? Is It Tied Down Behind That?any Help Or Pics Would Be Greatly Appreciated
	[Reply w/Quote]

01-25-2006, 01:48 PM	#2
~~Blazin810~~ Banned Age: 22 Join Date: Nov 2005 Posts: 2,474 Location: Northeast Iowa User is: OffLine	Re: 96 Heater Core Use the search button. There is a whole diagram on how to do it.
	[Reply w/Quote]

01-29-2006, 08:29 PM	#3
bigred96 Registered User Join Date: Jan 2006 Posts: 8 Location: User is: OffLine	Re: 96 Heater Core Quote: Originally Posted by GMCHIGHSIERRA Use the search button. There is a whole diagram on how to do it. THANKS FOR THE HELP PUT IT IN THIS WEEKEND TOOK ABOUT 6 HRS AND ALOTTA SCRAPED KNUCKLES. THANKS AGAIN!
	[Reply w/Quote]

01-30-2006, 12:06 AM	#4
~~Blazin810~~ Banned Age: 22 Join Date: Nov 2005 Posts: 2,474 Location: Northeast Iowa User is: OffLine	Re: 96 Heater Core Quote: Originally Posted by bigred96 THANKS FOR THE HELP PUT IT IN THIS WEEKEND TOOK ABOUT 6 HRS AND ALOTTA SCRAPED KNUCKLES. THANKS AGAIN! No problem. Now I gotta get the ambition to fix mine...and it just snowed again. BRRR!
	[Reply w/Quote]

01-30-2006, 01:26 AM	#5
sockjock Huge Ideas, Tiny Wallet Age: 44 Join Date: Aug 2005 Posts: 1,247 Location: Denton, NC User is: OffLine	Re: 96 Heater Core Just recently had to replace my heater core. What a major pain. The next time I have to do this to one of my blazers I will put some JBweld around the in/out tubes on the heater core. Didn't think of it then and it's too late now. This seems to be a real problem area. Good luck with yours. Quote: Originally Posted by GMCHIGHSIERRA No problem. Now I gotta get the ambition to fix mine...and it just snowed again. BRRR!
	[Reply w/Quote]

01-30-2006, 02:25 PM	#6
~~Blazin810~~ Banned Age: 22 Join Date: Nov 2005 Posts: 2,474 Location: Northeast Iowa User is: OffLine	Re: 96 Heater Core Quote: Originally Posted by sockjock Just recently had to replace my heater core. What a major pain. The next time I have to do this to one of my blazers I will put some JBweld around the in/out tubes on the heater core. Didn't think of it then and it's too late now. This seems to be a real problem area. Good luck with yours. Mine is clogged. JB Weld isn't going to help me here...
	[Reply w/Quote]

01-30-2006, 06:13 PM	#7
sockjock Huge Ideas, Tiny Wallet Age: 44 Join Date: Aug 2005 Posts: 1,247 Location: Denton, NC User is: OffLine	Re: 96 Heater Core Bummer! Time for scraped knuckles. Quote: Originally Posted by GMCHIGHSIERRA Mine is clogged. JB Weld isn't going to help me here...
	[Reply w/Quote]

05-03-2007, 08:27 PM	#8
mojo Registered User Join Date: May 2007 Posts: 2 Location: User is: OffLine	Re: 96 Heater Core Quote: Originally Posted by bigred96 Trying To Remove The Dash To Repalce Heater Core In 96 Jimmy Ive Been Told The Whole Dash Must Be Rem0ved To Do This. Got The Kick Plates Out And The Bolts Holding The Dash At The Bottom Seems To Be Loose At The Bottom But Not Quite There Yet.any Hint On How To Get This Thing Out. The Brackets At The Bottom Seem To Set On Some Kind Of Pins . Do I Need To Take Out The Radio ? Is It Tied Down Behind That?any Help Or Pics Would Be Greatly Appreciated Did you find a link ( Or can you give me a url) to "How to remove the dash to get to Heater Core". My 96 Blazer Heater core is shot and & would like to change it myself. Thanks
	[Reply w/Quote]

05-03-2007, 08:39 PM	#9
96blazer """"""""""""""""""""""""" Join Date: Jul 2001 Posts: 28,578 Location: ? User is: OffLine	Re: 96 Heater Core Quote: Originally Posted by mojo Did you find a link ( Or can you give me a url) to "How to remove the dash to get to Heater Core". My 96 Blazer Heater core is shot and & would like to change it myself. Thanks http://www.s10forum.com/forum/f136/h...cement-126737/
	[Reply w/Quote]

05-04-2007, 02:27 PM	#10
mojo Registered User Join Date: May 2007 Posts: 2 Location: User is: OffLine	Re: 96 Heater Core Quote: Originally Posted by 96blazer http://www.s10forum.com/forum/f136/h...cement-126737/ Thanks for the link. Its an excellent write up. Another one of many repaires I'll be soon adding to its journal.
	[Reply w/Quote]