1996 Jimmy- Headlights- walled 4 15"s in it ;)

dd_m4_xtrmbssjnky · 10-30-2009, 12:58 PM

ok so i am in the process of fixing up my old jimmy, had it since I was 17.

I am finishing up my stereo install in it... got 3 alternators and a/c still in there

but I want to do some things to the outside of it too...

I really want to see about putting some new headlights on it.. I have thought about doing a front end swap... but haven't really decided on what to do... i have thought about a trailblazer/envoy swap on it...

I want to put projector lights on my lil jimmy ultimately...

any help/thoughts would be appreciated. I just a point in the right direction

vids of my lil setup

http://www.youtube.com/watch?v=FSPfCEAA1jI
i can make cans float in my window http://www.youtube.com/watch?v=DeYbFCAlye0

not done with that part of it yet... still need to seal the front from the back and fiberglass to make the wall pretty... but it is on its way to being done...

dd_m4_xtrmbssjnky · 10-30-2009, 01:00 PM

here is my build log on another forum: http://www.caraudio.com/forum/showthread.php?t=421752

S10LT1 · 10-30-2009, 01:14 PM

nie man, nice to see another walled 4 door, hers a cople vids of mine. im in the same boat as you, in the process of fiberglassing and actually gluing down baffles, tired of breaking them loose.

http://www.youtube.com/watch?v=aJeusYShOoU

http://www.youtube.com/watch?v=BTUdIII4nqE

http://www.youtube.com/watch?v=t-Kx3Zk17-o

http://www.youtube.com/watch?v=Kh4cuZmCrhc

and the last, 25hz cammera on dash...lol

http://www.youtube.com/watch?v=p0skBeBRMzY

yours looks sick man, have u had it on the meter yet?

can you post some underhood pics, i need to get some more alts in when i upgrade my amp and wouldnt mind gettin some ideas.

dd_m4_xtrmbssjnky · 10-30-2009, 04:03 PM

I haven't had a chance to meter it at the 16v i run it all at yet, it's made to bass race 159.9's

those vids were on 12v's and it is still competitive in the 159.9 class

... i had a stator go bad in one of my alternators when the regulator got disconnected it fried my stator and rectifier diode.

S10LT1 · 10-30-2009, 04:42 PM

is it a kit you bought or did u make it?

i was planning on puttin in 2 more on that side and havin mounts fabd up, but if theres a kit that would make life much easier

mine is built for the 59.9 class(low 50's bass race atm, but i'm re-doin it this winter), i had a chance to hear a couple 59.9 vehicles when i was judging world finals this year in tulsa, as soon as i got back i stripped my truck for the re-build...lmao

looks good tho man, hopefully i seeya in the lanes next year

dd_m4_xtrmbssjnky · 10-30-2009, 04:46 PM

i am sponsored by ohio gen. I made the installation guide. just call them up and ask for gus. if you mention my jimmy he will know who i am, he and i talk enough, just tell him you want to do that too. I did this all myself.

dd_m4_xtrmbssjnky · 10-30-2009, 04:46 PM

tell him the jimmy with the batcap and dd equipment in south carolina.

S10LT1 · 10-30-2009, 05:05 PM

nie, thanks a lot man

dd_m4_xtrmbssjnky · 10-31-2009, 05:15 PM

no worries...

so anyone have any suggestions on headlights? lol

I am half tempted to fiberglass a bracket to put the headlights I want on it...

10-30-2009, 12:58 PM	#1
dd_m4_xtrmbssjnky Registered User Age: 23 Join Date: Jun 2009 Posts: 6 Location: User is: OffLine	1996 Jimmy- Headlights- walled 4 15"s in it ;) ok so i am in the process of fixing up my old jimmy, had it since I was 17. I am finishing up my stereo install in it... got 3 alternators and a/c still in there but I want to do some things to the outside of it too... I really want to see about putting some new headlights on it.. I have thought about doing a front end swap... but haven't really decided on what to do... i have thought about a trailblazer/envoy swap on it... I want to put projector lights on my lil jimmy ultimately... any help/thoughts would be appreciated. I just a point in the right direction vids of my lil setup http://www.youtube.com/watch?v=FSPfCEAA1jI i can make cans float in my window http://www.youtube.com/watch?v=DeYbFCAlye0 not done with that part of it yet... still need to seal the front from the back and fiberglass to make the wall pretty... but it is on its way to being done...
	[Reply w/Quote]

10-30-2009, 01:00 PM	#2
dd_m4_xtrmbssjnky Registered User Age: 23 Join Date: Jun 2009 Posts: 6 Location: User is: OffLine	Re: 1996 Jimmy- Headlights- walled 4 15"s in it ;) here is my build log on another forum: http://www.caraudio.com/forum/showthread.php?t=421752
	[Reply w/Quote]

10-30-2009, 01:14 PM	#3
S10LT1 Hillbilly Mechanic Age: 22 Join Date: Mar 2007 Posts: 201 Location: Oshawa/Toronto User is: OffLine	Re: 1996 Jimmy- Headlights- walled 4 15"s in it ;) nie man, nice to see another walled 4 door, hers a cople vids of mine. im in the same boat as you, in the process of fiberglassing and actually gluing down baffles, tired of breaking them loose. http://www.youtube.com/watch?v=aJeusYShOoU http://www.youtube.com/watch?v=BTUdIII4nqE http://www.youtube.com/watch?v=t-Kx3Zk17-o http://www.youtube.com/watch?v=Kh4cuZmCrhc and the last, 25hz cammera on dash...lol http://www.youtube.com/watch?v=p0skBeBRMzY yours looks sick man, have u had it on the meter yet? can you post some underhood pics, i need to get some more alts in when i upgrade my amp and wouldnt mind gettin some ideas. Last edited by S10LT1 : 10-30-2009 at 01:15 PM.
	[Reply w/Quote]

10-30-2009, 04:03 PM	#4
dd_m4_xtrmbssjnky Registered User Age: 23 Join Date: Jun 2009 Posts: 6 Location: User is: OffLine	Re: 1996 Jimmy- Headlights- walled 4 15"s in it ;) I haven't had a chance to meter it at the 16v i run it all at yet, it's made to bass race 159.9's those vids were on 12v's and it is still competitive in the 159.9 class ... i had a stator go bad in one of my alternators when the regulator got disconnected it fried my stator and rectifier diode.
	[Reply w/Quote]

10-30-2009, 04:42 PM	#5
S10LT1 Hillbilly Mechanic Age: 22 Join Date: Mar 2007 Posts: 201 Location: Oshawa/Toronto User is: OffLine	Re: 1996 Jimmy- Headlights- walled 4 15"s in it ;) is it a kit you bought or did u make it? i was planning on puttin in 2 more on that side and havin mounts fabd up, but if theres a kit that would make life much easier mine is built for the 59.9 class(low 50's bass race atm, but i'm re-doin it this winter), i had a chance to hear a couple 59.9 vehicles when i was judging world finals this year in tulsa, as soon as i got back i stripped my truck for the re-build...lmao looks good tho man, hopefully i seeya in the lanes next year Last edited by S10LT1 : 10-30-2009 at 04:44 PM.
	[Reply w/Quote]

10-30-2009, 04:46 PM	#6
dd_m4_xtrmbssjnky Registered User Age: 23 Join Date: Jun 2009 Posts: 6 Location: User is: OffLine	Re: 1996 Jimmy- Headlights- walled 4 15"s in it ;) i am sponsored by ohio gen. I made the installation guide. just call them up and ask for gus. if you mention my jimmy he will know who i am, he and i talk enough, just tell him you want to do that too. I did this all myself.
	[Reply w/Quote]

10-30-2009, 05:05 PM	#8
S10LT1 Hillbilly Mechanic Age: 22 Join Date: Mar 2007 Posts: 201 Location: Oshawa/Toronto User is: OffLine	Re: 1996 Jimmy- Headlights- walled 4 15"s in it ;) nie, thanks a lot man
	[Reply w/Quote]

10-31-2009, 05:15 PM	#9
dd_m4_xtrmbssjnky Registered User Age: 23 Join Date: Jun 2009 Posts: 6 Location: User is: OffLine	Re: 1996 Jimmy- Headlights- walled 4 15"s in it ;) no worries... so anyone have any suggestions on headlights? lol I am half tempted to fiberglass a bracket to put the headlights I want on it...
	[Reply w/Quote]