Post Ur 1st Gen Pics Here

Licenseplate · 10-07-2009, 03:54 AM

something about those lights just doesnt flow right at all

sexysonomaowner08 · 10-07-2009, 03:58 AM

There is something about that truck that tickled me..haha, some might get the joke, but yea, those lights kinnda dont work..

krly79 · 10-07-2009, 08:12 AM

Quote: Originally Posted by sexysonomaowner08

There is something about that truck that tickled me..haha, some might get the joke, but yea, those lights kinnda dont work..

The nasty factory gas tank mounted in the bed with the rusty straps?

S10HOTROD · 10-07-2009, 01:52 PM

Quote: Originally Posted by krly79

Yeah, I have stripped a lot off the camaro. I plan on keeping it and doing an LQ4 or LQ9 down the road, but I really needed a truck badly but wanted it my way.

Nice car

Cool, Yeah it sounded like you stripped her done a bit (does she look better with clothes on or off, ha, ha). You can't beat the feeling of rumbling down the road in a little S10, & everyone looking what the hell.

Tks, the Sube is definitely a great daily driver. Bar none, best I've had yet, but always room for improvement.

cheers,

s-ten_stan · 10-07-2009, 02:10 PM

Quote: Originally Posted by baggedzq8

here you go kpriest92

damn that shit is nice!! what color is that?

infinity96 · 10-07-2009, 02:41 PM

Quote: Originally Posted by FLAWLESS

THOSE TAIL LIGHTS ARE OFF THE NEW CADILLAC CTS STATION WAGON.

-DouG- · 10-07-2009, 06:49 PM

Quote: Originally Posted by Slammed91dime

heres my 91 dime on air and my buddies 89 yota on cce hydros. let me know what you think

Is the bed mounted with body mounts or solid to the frame like stock? any more pics? pics of the interior/bed?

FLAWLESS · 10-07-2009, 11:57 PM

Quote: Originally Posted by infinity96

THOSE TAIL LIGHTS ARE OFF THE NEW CADILLAC CTS STATION WAGON.

actually there off a cadillac srx!

allmixedup · 10-08-2009, 02:00 PM

Quote: Originally Posted by baggedzq8

here you go kpriest92

This truck will go into the one of my fav's folder. Nice truck man, clean, simple, clean, colors look good together.

Close2theground · 10-09-2009, 03:13 PM

My other 1st gen when i got it in 03

whole lot of work later 09

2THPIC · 10-09-2009, 04:25 PM

yea, you just bought a different truck. lol j/k

scpatterson · 10-09-2009, 04:51 PM

Quote: Originally Posted by Close2theground

My other 1st gen when i got it in 03

whole lot of work later 09

I like this..great car...

2THPIC · 10-09-2009, 06:22 PM

Quote: Originally Posted by scpatterson

I like this..great car...

Humm, Take another look at it. It's not a car, can you say "TRUCK".

lol

Jest messing with ya, gosh!!!!!

556mm · 10-09-2009, 06:43 PM

close2theground do you have any side shots?

excaliber · 10-09-2009, 07:40 PM

here is my 1991 it got totaled in 1992, due to a guy running a stop sign and running in front of me, I hit him right in the door. may he RIP.

llorracs93s10 · 10-09-2009, 07:49 PM

Quote: Originally Posted by excaliber

here is my 1991 it got totaled in 1992, due to a guy running a stop sign and running in front of me, I hit him right in the door. may he RIP.

why dont you show some pics of the truck in ur sig and the tires its got for it?

s10kid17 · 10-09-2009, 08:05 PM

Quote: Originally Posted by excaliber

here is my 1991 it got totaled in 1992, due to a guy running a stop sign and running in front of me, I hit him right in the door. may he RIP.

Ouch.

1stiski · 10-09-2009, 08:39 PM

Quote: Originally Posted by 12Pack

the 88

TRUCK looks great.. BTW , I do like the ole Lincoln MK 7 LSC wheels ! Sweet look. I've got a set in my garage that I polished just like yours. Nice.

excaliber · 10-09-2009, 09:20 PM

herre is my 1987 dime, got a new 383 roller motor about to go in, the 350 just wasnt cutting it, and my new tires 345/35/18s on corvette replica wheels 18x12

llorracs93s10 · 10-09-2009, 09:24 PM

^ now thats wat i am talking about....I want that size under my damn truck! I should do a mini frame work where my rear end is notch it inward, shorten the rear axles and do that size.

excaliber · 10-09-2009, 10:21 PM

thats kind of what I'm doing, I have an extra frame, gonna weld it inside the stock frame, then cut the stock frame off, it wil give me an extra 3 inches, I got an 8.8 explorer rear end, and am doing the 2 short side axle thing to it, and the corvette rims I got dish in 71/2 inches so it will all fit under nicely.

llorracs93s10 · 10-09-2009, 10:46 PM

Quote: Originally Posted by excaliber

thats kind of what I'm doing, I have an extra frame, gonna weld it inside the stock frame, then cut the stock frame off, it wil give me an extra 3 inches, I got an 8.8 explorer rear end, and am doing the 2 short side axle thing to it, and the corvette rims I got dish in 71/2 inches so it will all fit under nicely.

ha, i was just joking about that, but hell if it works out let me know. Id really like to fit a wide ass tire under there like that.

scpatterson · 10-09-2009, 11:00 PM

Quote: Originally Posted by 2THPIC

Humm, Take another look at it. It's not a car, can you say "TRUCK".

lol

Jest messing with ya, gosh!!!!!

lol..i just caught that

2dimes · 10-10-2009, 05:54 PM

my 87 currently

llorracs93s10 · 10-10-2009, 11:14 PM

Quote: Originally Posted by 2dimes

my 87 currently

besides the huge grille emblem, i like that front end, need more pics of it though, straight ahead shots or something.

heeter_33 · 10-10-2009, 11:23 PM

i kind of like the big emblem, but it looks weird cause of the phantom grille. usually people go with the phantom grill for a sleek clean look, and a big emblem just doesnt fit right with nothing else there. if it was just a billet grille and there was still visible headlights, i think itd look sick and fit in more.

1stiski · 10-12-2009, 08:35 AM

Quote: Originally Posted by 2dimes

my 87 currently

Like the "moon" eyes . Nice lookin rig. Very old school hot rod style.

2dimes · 10-12-2009, 04:09 PM

Quote: Originally Posted by 1stiski

Like the "moon" eyes . Nice lookin rig. Very old school hot rod style.

thanx man heres a pic of the bed

S10HOTROD · 10-12-2009, 05:51 PM

Had truck out yesterday & took some new pics with front skinnies finally on. Also took off belltech front sway bar (has better front end lift & weight transfer now)

cheers,

llorracs93s10 · 10-12-2009, 06:56 PM

s10hotrod, what drop is that? do you have pics of ur header to UCA clearnace and those are 26inch tall tires in the rear correct?

jadalexm · 10-12-2009, 08:03 PM

lower90xcab · 10-12-2009, 08:48 PM

s10hotrod, thats a good lookin truck......

89Chubby · 10-13-2009, 01:39 PM

I almost feel ashamed to post mine here. Compared to some of the other trucks, mine's a turd, but I love the thing. Had it for about a year and traded it off, then got an opportunity last week to get it back in exchange for my (slow as hell and almost bone-stock) '84 Mustang, so I jumped at the chance. Finally got a chance to give it a wash and wax yesterday, but I still need to give it a good vacuuming. Interior's not much to look at, but it's comfy enough...

Licenseplate · 10-13-2009, 06:08 PM

89Chubby your truck is mint!
i wish mine had a body as straight as that. jsut remember everyones gotta start somewhere, whats the plans for it?

AK99 · 10-13-2009, 10:44 PM

Not the prettiest, but it's been a few years since pics were last taken.

Looks mostly stock, but it's actually far from it. Originally had all the chrome and a blue bench interior. The chrome is no more (mostly), the interior is from a Sonoma GT, and there's been a few things done to make it perform better.

89Chubby · 10-14-2009, 02:04 AM

Quote: Originally Posted by Licenseplate

89Chubby your truck is mint!
i wish mine had a body as straight as that. jsut remember everyones gotta start somewhere, whats the plans for it?

Thanks. It's really not all that once you see it up close, but it usually comes out sorta nice in pics and when looking at it from a distance. More dents, scratches, dings, and whatnot than can be counted. And the sun glare managed to somehow hide the gory cracks in the dash pad (one of which I'm using to run a wire from the lighter outlet to my ghetto-rigged neon dome light).

Plans include ... ummm ... putting in gas and driving it to/from work every day.

If I had money to throw at it, I'd give it a 2/3 drop, put on a bed cover, tint the windows, replace the rear window with a one-piece (I've got shims to keep the thing from rattling and driving me nuts, but it makes it non-functional), put on some matching tires, and maybe a couple of minor gas mileage/horsepower mods (electric fan, K&N filter, 4.3 TBI/bored intake, and better exhaust). But I'm pretty well flat-broke, so ... meh. I'm just keeping the thing clean and in good running condition for the time being.

dguzzardo22 · 10-14-2009, 03:53 AM

S10HOTROD · 10-14-2009, 02:31 PM

Quote: Originally Posted by llorracs93s10

s10hotrod, what drop is that? do you have pics of ur header to UCA clearnace and those are 26inch tall tires in the rear correct?

lower90xcab. Scott thanks for your comments.

Rear drop is all leaf spring re-arc (no blocks). Had leafs redone for 3" drop, but think it maybe closer to 4" drop in rear (also removed overload). Front is a 3" drop also (belltech 2" spindles & 1" lowering spring). However, with the V8, it is probably 3 1/2" - 4" drop in front. The rear tires are 26.1" tall (Mickey Thompson ET Street drag radials 275/50R15) mounted on 15x9 Draglites. Front skinnies are 26x6.00R15LT Mickey Sportsman S/R radials (26" tall), mounted on 15x4 Draglites.

Since I installed slide-a-links, unforunately truck is now too low. I'm going to refabricate the front spring eye bracket & raise 1". I may also re-arc/raise rear leafs 1", which will also help my moroso 3way drag shocks work even better. On the front, I just removed belltech sway bar & plan on removing belltech 1" springs & drop shocks & replace with either moog 4cyl springs & moroso drag shocks, or replace with QA1 Pro coilovers with their small block springs. This would also raise front slightly & front end would lift more for even better weight transfer.

Pics of slide-a-links (including, ground clearance & front bracket which I will refab & raise higher):

Engine has been in truck for over 10 years, & still have no headers. Originally I built a (sleeper) street truck with blacked out camaro wheels & no headers to keep it quieter. Now that I just put truck back on the road & changed to a street/strip weekend driver, headers are on "TOP OF MY LIST". Future plans are to rebuild my 350 4 bolt main to a 383 stroker (500+hp), & with 350+hp in truck now, hard to match a set of headers to work well on both setups ? Also before I get headers, I would like to get new fuel cell & move behind rear-end underneath, so I can run nice straight exhaust down each frame rail.

Pics of engine (over 10 years in truck & still runs great & looks ok):

cheers,

kpriest92 · 10-14-2009, 07:15 PM

Quote: Originally Posted by s-ten_stan

damn that shit is nice!! what color is that?

yea thanks bro. i dunno what color it is.

kpriest92 · 10-14-2009, 07:22 PM

Quote: Originally Posted by heeter_33

that truck is sick, personally i like the traditional cowl hoods better but that doesnt actually look too bad. and you should throw some blazer mirrors on there too

thanks dude, yea i just threw some more low profile mirrors on it a couple weeks ago. look better but they are kinda cheapo (ebay) ill just keep em until i can find some nicer ones

kpriest92 · 10-14-2009, 07:56 PM

heres more pics for you guys.

sonomaguy · 10-14-2009, 08:52 PM

Truck is definately different. Looks good but I'm just not feelin the dash material, as long as you like it.

AK99 · 10-14-2009, 09:48 PM

The plaid material is one of the coolest features... and the shifter

Close2theground · 10-15-2009, 12:03 AM

Quote: Originally Posted by 2THPIC

yea, you just bought a different truck. lol j/k

actually this is the only truck i can say i built ( for now anyways...)

Quote: Originally Posted by lowcherrydime

close2theground do you have any side shots?

i only have these for now but i am going out for more pics in a couple day for the last ride of the year ( puting it away befour halloween ) i can get more if you want....

kinda a side shot...

allmixedup · 10-15-2009, 01:46 PM

Quote: Originally Posted by AK99

The plaid material is one of the coolest features... and the shifter

I agree you have to appreciate the work that went into that. I can only imagine the time it took to get the lines to match between panels. Not to mention stay straight vertically and horizontally in between. Well done man !

G91s10 · 10-15-2009, 06:29 PM

Just picked it up yesterday for the nice price of $1000

My first s10

By the end of next summer all the body work will be done (Rust repaired, custom shaved tailgate and rollpan) and repainted and the windows tinted, rear decal thrown on, full custom exhaust w/t headers, custom badging, dash done, custom guages and a system in. By the end of this winter hopefully the front bumper will be repainted, aftermarket smoked tail lights in and the lip/mirrors/wiperblades painted. Don't know what the finished look will be except it'll be stock height as I bought this truck to haul around my horse stuff... Eventually I wanna throw in a throttlebody and throttlebody spacer and COI. Nothing esle as it's first and foremost a working truck

sonomaguy · 10-15-2009, 06:50 PM

Looks good, nice start. Doesn't look like there is a lot of rust to repair on there. What kind of rear decal? Did you join Zero Clearance or another club or is it a horse decal.

89Chubby · 10-16-2009, 12:32 AM

Quote: Originally Posted by G91s10

Just picked it up yesterday for the nice price of $1000 My first s10

By the end of next summer all the body work will be done (Rust repaired, custom shaved tailgate and rollpan) and repainted and the windows tinted, rear decal thrown on, full custom exhaust w/t headers, custom badging, dash done, custom guages and a system in. By the end of this winter hopefully the front bumper will be repainted, aftermarket smoked tail lights in and the lip/mirrors/wiperblades painted. Don't know what the finished look will be except it'll be stock height as I bought this truck to haul around my horse stuff... Eventually I wanna throw in a throttlebody and throttlebody spacer and COI. Nothing esle as it's first and foremost a working truck

Honestly, I'd just leave it as-is. It looks great, IMO, and if you're just going to use it as a hauler/beater, then why bother to blow the money on so many appearance mods?

Towmanred · 10-16-2009, 08:28 AM

Here's my 93 again, the heart transplant is almost done! Just need some fans and exhaust and i'll be breakin in the motor

It's sitting a little high cause it's sitting up on a stand in the front cause i was fixing a tranny line..

10-07-2009, 03:33 AM	#4701
FLAWLESS Registered User Join Date: Jan 2009 Posts: 4 Location: User is: OffLine	Re: Post Ur 1st Gen Pics Here
	[Reply w/Quote]

10-07-2009, 03:54 AM	#4702
Licenseplate baby blue Age: 21 Join Date: Sep 2006 Posts: 753 Location: BC, Canada User is: OffLine	Re: Post Ur 1st Gen Pics Here something about those lights just doesnt flow right at all
	[Reply w/Quote]

10-07-2009, 03:58 AM	#4703
sexysonomaowner08 Registered User Join Date: Jun 2008 Posts: 329 Location: Upland, SoCal User is: OffLine	Re: Post Ur 1st Gen Pics Here There is something about that truck that tickled me..haha, some might get the joke, but yea, those lights kinnda dont work..
	[Reply w/Quote]

10-07-2009, 08:12 AM	#4704
krly79 Registered User Join Date: Feb 2008 Posts: 52 Location: User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by sexysonomaowner08 There is something about that truck that tickled me..haha, some might get the joke, but yea, those lights kinnda dont work.. The nasty factory gas tank mounted in the bed with the rusty straps?
	[Reply w/Quote]

10-07-2009, 01:52 PM	#4705
S10HOTROD Registered User Age: 45 Join Date: Jul 2009 Posts: 41 Location: Vancouver Island, BC User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by krly79 Yeah, I have stripped a lot off the camaro. I plan on keeping it and doing an LQ4 or LQ9 down the road, but I really needed a truck badly but wanted it my way. Nice car Cool, Yeah it sounded like you stripped her done a bit (does she look better with clothes on or off, ha, ha). You can't beat the feeling of rumbling down the road in a little S10, & everyone looking what the hell. Tks, the Sube is definitely a great daily driver. Bar none, best I've had yet, but always room for improvement. cheers,
	[Reply w/Quote]

10-07-2009, 02:10 PM	#4706
s-ten_stan Registered User Age: 20 Join Date: Sep 2009 Posts: 20 Location: User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by baggedzq8 here you go kpriest92 damn that shit is nice!! what color is that?
	[Reply w/Quote]

10-07-2009, 02:41 PM	#4707
infinity96 Registered User Join Date: Mar 2009 Posts: 31 Location: User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by FLAWLESS THOSE TAIL LIGHTS ARE OFF THE NEW CADILLAC CTS STATION WAGON.
	[Reply w/Quote]

10-07-2009, 06:49 PM	#4708
-DouG- ____________ Age: 37 Join Date: Oct 2003 Posts: 308 Location: eastern Pa User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by Slammed91dime heres my 91 dime on air and my buddies 89 yota on cce hydros. let me know what you think Is the bed mounted with body mounts or solid to the frame like stock? any more pics? pics of the interior/bed?
	[Reply w/Quote]

10-07-2009, 11:57 PM	#4709
FLAWLESS Registered User Join Date: Jan 2009 Posts: 4 Location: User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by infinity96 THOSE TAIL LIGHTS ARE OFF THE NEW CADILLAC CTS STATION WAGON. actually there off a cadillac srx!
	[Reply w/Quote]

10-08-2009, 02:00 PM	#4710
allmixedup under construction Join Date: Mar 2008 Posts: 84 Location: joetown User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by baggedzq8 here you go kpriest92 This truck will go into the one of my fav's folder. Nice truck man, clean, simple, clean, colors look good together.
	[Reply w/Quote]

10-09-2009, 03:13 PM	#4711
Close2theground . Join Date: Jan 2007 Posts: 268 Location: Ontario Canada User is: OffLine	Re: Post Ur 1st Gen Pics Here My other 1st gen when i got it in 03 whole lot of work later 09
	[Reply w/Quote]

10-09-2009, 04:25 PM	#4712
2THPIC Si vis pacem, para bellum Age: 35 Join Date: Jun 2007 Posts: 2,295 Location: lonsdale, ar User is: OffLine	Re: Post Ur 1st Gen Pics Here yea, you just bought a different truck. lol j/k
	[Reply w/Quote]

10-09-2009, 04:51 PM	#4713
scpatterson Registered User Join Date: Aug 2009 Posts: 37 Location: User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by Close2theground My other 1st gen when i got it in 03 whole lot of work later 09 I like this..great car...
	[Reply w/Quote]

10-09-2009, 06:22 PM	#4714
2THPIC Si vis pacem, para bellum Age: 35 Join Date: Jun 2007 Posts: 2,295 Location: lonsdale, ar User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by scpatterson I like this..great car... Humm, Take another look at it. It's not a car, can you say "TRUCK". lol Jest messing with ya, gosh!!!!!
	[Reply w/Quote]

10-09-2009, 06:43 PM	#4715
556mm &amp;lt;3 redheads Age: 27 Join Date: Oct 2005 Posts: 26,131 Location: User is: OffLine	Re: Post Ur 1st Gen Pics Here close2theground do you have any side shots?
	[Reply w/Quote]

10-09-2009, 07:40 PM	#4716
excaliber Registered User Age: 41 Join Date: Apr 2008 Posts: 111 Location: User is: OffLine	Re: Post Ur 1st Gen Pics Here here is my 1991 it got totaled in 1992, due to a guy running a stop sign and running in front of me, I hit him right in the door. may he RIP.
	[Reply w/Quote]

10-09-2009, 07:49 PM	#4717
llorracs93s10 Registered User Age: 22 Join Date: Jun 2007 Posts: 5,210 Location: Middletown, DE User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by excaliber here is my 1991 it got totaled in 1992, due to a guy running a stop sign and running in front of me, I hit him right in the door. may he RIP. why dont you show some pics of the truck in ur sig and the tires its got for it?
	[Reply w/Quote]

10-09-2009, 08:05 PM	#4718
s10kid17 Registered User Age: 18 Join Date: Jan 2009 Posts: 1,080 Location: Vincennes, IN User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by excaliber here is my 1991 it got totaled in 1992, due to a guy running a stop sign and running in front of me, I hit him right in the door. may he RIP. Ouch.
	[Reply w/Quote]

10-09-2009, 08:39 PM	#4719
1stiski Registered User Age: 48 Join Date: Jul 2009 Posts: 72 Location: Elizabethville, PA User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by 12Pack the 88 TRUCK looks great.. BTW , I do like the ole Lincoln MK 7 LSC wheels ! Sweet look. I've got a set in my garage that I polished just like yours. Nice.
	[Reply w/Quote]

10-09-2009, 09:20 PM	#4720
excaliber Registered User Age: 41 Join Date: Apr 2008 Posts: 111 Location: User is: OffLine	Re: Post Ur 1st Gen Pics Here herre is my 1987 dime, got a new 383 roller motor about to go in, the 350 just wasnt cutting it, and my new tires 345/35/18s on corvette replica wheels 18x12
	[Reply w/Quote]

10-09-2009, 09:24 PM	#4721
llorracs93s10 Registered User Age: 22 Join Date: Jun 2007 Posts: 5,210 Location: Middletown, DE User is: OffLine	Re: Post Ur 1st Gen Pics Here ^ now thats wat i am talking about....I want that size under my damn truck! I should do a mini frame work where my rear end is notch it inward, shorten the rear axles and do that size.
	[Reply w/Quote]

10-09-2009, 10:21 PM	#4722
excaliber Registered User Age: 41 Join Date: Apr 2008 Posts: 111 Location: User is: OffLine	Re: Post Ur 1st Gen Pics Here thats kind of what I'm doing, I have an extra frame, gonna weld it inside the stock frame, then cut the stock frame off, it wil give me an extra 3 inches, I got an 8.8 explorer rear end, and am doing the 2 short side axle thing to it, and the corvette rims I got dish in 71/2 inches so it will all fit under nicely.
	[Reply w/Quote]

10-09-2009, 10:46 PM	#4723
llorracs93s10 Registered User Age: 22 Join Date: Jun 2007 Posts: 5,210 Location: Middletown, DE User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by excaliber thats kind of what I'm doing, I have an extra frame, gonna weld it inside the stock frame, then cut the stock frame off, it wil give me an extra 3 inches, I got an 8.8 explorer rear end, and am doing the 2 short side axle thing to it, and the corvette rims I got dish in 71/2 inches so it will all fit under nicely. ha, i was just joking about that, but hell if it works out let me know. Id really like to fit a wide ass tire under there like that.
	[Reply w/Quote]

10-09-2009, 11:00 PM	#4724
scpatterson Registered User Join Date: Aug 2009 Posts: 37 Location: User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by 2THPIC Humm, Take another look at it. It's not a car, can you say "TRUCK". lol Jest messing with ya, gosh!!!!! lol..i just caught that
	[Reply w/Quote]

10-10-2009, 05:54 PM	#4725
2dimes Registered User Age: 35 Join Date: Apr 2003 Posts: 78 Location: lotts of potholes,PA User is: OffLine	Re: Post Ur 1st Gen Pics Here my 87 currently
	[Reply w/Quote]

10-10-2009, 11:14 PM	#4726
llorracs93s10 Registered User Age: 22 Join Date: Jun 2007 Posts: 5,210 Location: Middletown, DE User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by 2dimes my 87 currently besides the huge grille emblem, i like that front end, need more pics of it though, straight ahead shots or something.
	[Reply w/Quote]

10-10-2009, 11:23 PM	#4727
heeter_33 Registered User Age: 19 Join Date: Feb 2009 Posts: 990 Location: Canada User is: OffLine	Re: Post Ur 1st Gen Pics Here i kind of like the big emblem, but it looks weird cause of the phantom grille. usually people go with the phantom grill for a sleek clean look, and a big emblem just doesnt fit right with nothing else there. if it was just a billet grille and there was still visible headlights, i think itd look sick and fit in more.
	[Reply w/Quote]

10-12-2009, 08:35 AM	#4728
1stiski Registered User Age: 48 Join Date: Jul 2009 Posts: 72 Location: Elizabethville, PA User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by 2dimes my 87 currently Like the "moon" eyes . Nice lookin rig. Very old school hot rod style.
	[Reply w/Quote]

10-12-2009, 04:09 PM	#4729
2dimes Registered User Age: 35 Join Date: Apr 2003 Posts: 78 Location: lotts of potholes,PA User is: OffLine	Re: Post Ur 1st Gen Pics Here Quote: Originally Posted by 1stiski Like the "moon" eyes . Nice lookin rig. Very old school hot rod style. thanx man heres a pic of the bed
	[Reply w/Quote]

10-12-2009, 05:51 PM	#4730
S10HOTROD Registered User Age: 45 Join Date: Jul 2009 Posts: 41 Location: Vancouver Island, BC User is: OffLine	Re: Post Ur 1st Gen Pics Here Had truck out yesterday & took some new pics with front skinnies finally on. Also took off belltech front sway bar (has better front end lift & weight transfer now) cheers,
	[Reply w/Quote]

10-12-2009, 06:56 PM	#4731
llorracs93s10 Registered User Age: 22 Join Date: Jun 2007 Posts: 5,210 Location: Middletown, DE User is: OffLine	Re: Post Ur 1st Gen Pics Here s10hotrod, what drop is that? do you have pics of ur header to UCA clearnace and those are 26inch tall tires in the rear correct?
	[Reply w/Quote]

10-12-2009, 08:03 PM	#4732
jadalexm Registered User Age: 18 Join Date: Apr 2008 Posts: 4 Location: User is: OffLine	Re: Post Ur 1st Gen Pics Here
	[Reply w/Quote]

10-12-2009, 08:48 PM	#4733
lower90xcab ZQ8 & ZR2 owner Age: 26 Join Date: Jul 2004 Posts: 629 Location: Lafayette, IN User is: OffLine	Re: Post Ur 1st Gen Pics Here s10hotrod, thats a good lookin truck......
	[Reply w/Quote]

10-13-2009, 01:39 PM	#4734
89Chubby King Turd Polisher Join Date: Dec 2007 Posts: 493 Location: Apache Junction, AZ User is: OffLine	Re: Post Ur 1st Gen Pics Here I almost feel ashamed to post mine here. Compared to some of the other trucks, mine's a turd, but I love the thing. Had it for about a year and traded it off, then got an opportunity last week to get it back in exchange for my (slow as hell and almost bone-stock) '84 Mustang, so I jumped at the chance. Finally got a chance to give it a wash and wax yesterday, but I still need to give it a good vacuuming. Interior's not much to look at, but it's comfy enough...
	[Reply w/Quote]

10-13-2009, 06:08 PM	#4735
Licenseplate baby blue Age: 21 Join Date: Sep 2006 Posts: 753 Location: BC, Canada User is: OffLine	Re: Post Ur 1st Gen Pics Here 89Chubby your truck is mint! i wish mine had a body as straight as that. jsut remember everyones gotta start somewhere, whats the plans for it?
	[Reply w/Quote]