My '93 Dime Project - aka "The Cookie Cutter"

dontxtrust · 10-14-2009, 03:32 AM

Quote: Originally Posted by tsayyote

$400 but its on gas so the damn tank weighs more than the welder. but check craigslist. good deals there!

yeh im not lookig for one right now but i need to buy one, i kinda stole my buddies from him...gotta give it back soon lol

Booger8993 · 10-14-2009, 03:17 PM

yeah i've been lookin around for anything lol the only thing i've ever welded w/ is a damn ancient stick welder once! not too fun i must say. i'll find somethin eventually

mrroller · 10-14-2009, 10:24 PM

Quote: Originally Posted by dontxtrust

yeh im not lookig for one right now but i need to buy one, i kinda stole my buddies from him...gotta give it back soon lol

Yeah jerk when you gonna be done with that thing?!

Jk man just take care of it lol. I will need it back once winter hits though, so I can work on my truck.

dontxtrust · 10-14-2009, 10:40 PM

Quote: Originally Posted by mrroller

Yeah jerk when you gonna be done with that thing?! Jk man just take care of it lol. I will need it back once winter hits though, so I can work on my truck.

lol before winter! after that ill drive my truck to your house to weld hahah

Booger8993 · 10-15-2009, 08:55 PM

a lil update fellas....

dontxtrust · 10-15-2009, 09:29 PM

nice! now get that front done hahha!!

Booger8993 · 10-15-2009, 10:06 PM

oh yea thats gonna be the fun part lol i got the 4.3 motor in mine so everything's a lil more cramped. i haven't quite figured out what i'm gonna do with the wiring harness where the ecu and headlights come together. i mean its smack in the middle where the fire wall tub is gonna go lol

dontxtrust · 10-15-2009, 10:42 PM

Quote: Originally Posted by Booger8993

oh yea thats gonna be the fun part lol i got the 4.3 motor in mine so everything's a lil more cramped. i haven't quite figured out what i'm gonna do with the wiring harness where the ecu and headlights come together. i mean its smack in the middle where the fire wall tub is gonna go lol

lol goodluck

scott9001 · 10-15-2009, 11:51 PM

hey man when you were talking about your valves you might as well go 1/2 to half becuase you will prob end up using less fittings, and for your dump if you get plugs for the end of the valve then you can drill a hole in the end to make it the speed you want it. its really hard to find a ride height with a 3/8 hole i find. i ahve a 1/4 hole drilled in mine, and if your pissin around in a parking lot you can pull the plug so you can go up and down real quick. btw its to bad you half to wait so long for the arms but they are nice. truck looks great man keep us informed.

8tninedime · 10-16-2009, 12:03 AM

you got a nice truck for sure....

tsayyote · 10-16-2009, 12:14 AM

You gunna color your arms or leave 'em raw finish?

Booger8993 · 10-16-2009, 12:55 AM

Quote: Originally Posted by scott9001

hey man when you were talking about your valves you might as well go 1/2 to half becuase you will prob end up using less fittings, and for your dump if you get plugs for the end of the valve then you can drill a hole in the end to make it the speed you want it. its really hard to find a ride height with a 3/8 hole i find. i ahve a 1/4 hole drilled in mine, and if your pissin around in a parking lot you can pull the plug so you can go up and down real quick. btw its to bad you half to wait so long for the arms but they are nice. truck looks great man keep us informed.

hell yea i really like that idea

i was plannin on running all 1/2" now that i've sat down and drawn everything out. but i never thought of pluggin it and then drillin a hole. i was jus gonna spend more $ and by the control/silencer that goes on the end but bump that. right on

Booger8993 · 10-16-2009, 12:56 AM

thanks ya'll.

yea i'm gonna take off the arms and paint em. i got some left over GM silver they shot the top of my two-tone w/ i was thinkin of doin that color but idk, might jus stick w/ black. i'll keep ya'll informed lol

scott9001 · 10-16-2009, 02:17 PM

Quote: Originally Posted by Booger8993

hell yea i really like that idea i was plannin on running all 1/2" now that i've sat down and drawn everything out. but i never thought of pluggin it and then drillin a hole. i was jus gonna spend more $ and by the control/silencer that goes on the end but bump that. right on

becasue it really is a complete bitch trying to find a ride height when its quick.

tsayyote · 10-16-2009, 09:00 PM

Quote: Originally Posted by Booger8993

hell yea i really like that idea i was plannin on running all 1/2" now that i've sat down and drawn everything out. but i never thought of pluggin it and then drillin a hole. i was jus gonna spend more $ and by the control/silencer that goes on the end but bump that. right on

If you need mufflers, i got 8 of em and i'll be using 4 so I can sell the other 4 for $15 shipped.

1/2" thread about 4" in length.

Booger8993 · 10-17-2009, 02:16 AM

alright cool. i'm not too sure yet what exactly i'm gonna go with but i'll def let ya know when i do. gonna try and get some cuttin done on the front saturday if i got time between work and school

S-10MASTER · 10-17-2009, 03:24 AM

Coming along pretty nice man. Can't wait to see this thing finished.

tsayyote · 10-17-2009, 04:23 AM

Quote: Originally Posted by Booger8993

alright cool. i'm not too sure yet what exactly i'm gonna go with but i'll def let ya know when i do. gonna try and get some cuttin done on the front saturday if i got time between work and school

no worries, they aint goin anywhere if anything i'll keep em as backups. if you ever need 'em hit me up on pm.

mylostsoul · 10-17-2009, 11:54 AM

Quote: Originally Posted by dontxtrust

good deal, i just went out to work on mine and i was movin the frame around and i dropped it on my finger... i think its broke and i might need stitches

I KNOW HOW YOU FEEL!!! my first truck I bagged, and I ended up screwin up my 2.2 motor somehow ... well that was a good time to get a new bed, new motor and a back half ... Me and a buddy were taking ever thing apart and he moved the airline ... and I mean just moved it to get something outta the way ... PSST BAM!!! ... my foot was under the frame ... I dropped a socket and went to get it and on the way back up when it all happened ... and mind you ... my foot was not flat it was on the side ... so i guess I learned 2 lessons ... PTC Fittings FTW no more lowes/home depot things ... and 2 .. i guess all those years our parents hounded us about milk making our bones strong ... they werent lieing ... but on a better note ... GOOD WORK DUDE!

Booger8993 · 10-17-2009, 11:58 AM

Quote: Originally Posted by mylostsoul

I KNOW HOW YOU FEEL!!! my first truck I bagged, and I ended up screwin up my 2.2 motor somehow ... well that was a good time to get a new bed, new motor and a back half ... Me and a buddy were taking ever thing apart and he moved the airline ... and I mean just moved it to get something outta the way ... PSST BAM!!! ... my foot was under the frame ... I dropped a socket and went to get it and on the way back up when it all happened ... and mind you ... my foot was not flat it was on the side ... so i guess I learned 2 lessons ... PTC Fittings FTW no more lowes/home depot things ... and 2 .. i guess all those years our parents hounded us about milk making our bones strong ... they werent lieing ... but on a better note ... GOOD WORK DUDE!

lol dang dude that sucks BAD! lol yea i've heard bout never using those things you get from home depot and places like that but my buddy had a line blow out on his mazda in a parkin lot one time and that was our last resort. we had to cut that section of line out and filled it full of connectors and all sorts of fittins from LOWES lol. he barely made it home

Booger8993 · 10-17-2009, 01:13 PM

a lil bit of primer

the home-made paint rack lol

scott9001 · 10-18-2009, 06:14 PM

what are you oging to do for paint?

Booger8993 · 10-18-2009, 08:06 PM

prob silver

blazerida88 · 10-19-2009, 07:29 PM

looks good booger, have ya found a bed yet? i have been looking around down here for ya.

this is marcus btw

Booger8993 · 10-19-2009, 08:55 PM

Quote: Originally Posted by blazerida88

looks good booger, have ya found a bed yet? i have been looking around down here for ya.

this is marcus btw

nah hadn't found a bed yet. i got some guy to call but i cant see his beds. i think he works for a junk yard or something. but yea its coming along, slowly but surely lol. i'm probably jus gonna throw this beat up back on and cut it up and all first, then find a good one later

Booger8993 · 10-20-2009, 01:48 PM

well i've been tryin for three days now to paint the control arms but its been too freakin cold down here... it was a high of like 50 saturday and sunday. so maybe i'll be gettin em finished up today sometime ...

ordered all my valves and switch box stuff yesterday too. should be here next week HOPEFULLY

erieinksdime91 · 10-20-2009, 03:38 PM

Keep up the good work bro! Looking sweet!

Booger8993 · 10-21-2009, 08:51 PM

yanked the heat and a/c...

blazerida88 · 10-22-2009, 08:03 PM

cut it up man, i built a 93 just like urs that layed 20's, its in the baggin it section, project: first gen is the thread title, we actually just got the truck back for my bro

Booger8993 · 10-23-2009, 11:01 AM

oh yea dude. cant wait i'm gonna try and get the spring pocets cut now. got all the lines run up front. still gotta figure out where i'm gonna move the e-brake and the harness mount on the driver side...

but i jus got my driveshaft back - anyone got an idea of what angle to set the rear end... i'm wantin to think 3-5 degrees but i'm not exactly sure

dontxtrust · 10-23-2009, 04:18 PM

mines at 2 degrees at ride height

Booger8993 · 10-23-2009, 07:17 PM

bout freakin time lol

Booger8993 · 10-23-2009, 07:18 PM

dontxtrust · 10-23-2009, 08:42 PM

Quote: Originally Posted by Booger8993

nice! looks good, did you flare you spring pockets?

V8Blaze · 10-23-2009, 10:30 PM

dont leave those corners like that, they will crack. They need to rounded to spread the stress over the entire area

Booger8993 · 10-24-2009, 12:33 PM

Quote: Originally Posted by dontxtrust

nice! looks good, did you flare you spring pockets?

nah i hadn't done that... i'm not sure if i'll have to yet. i got some more workin to do on em, rounding off and a lil more clearance. i jus had to throw it up there to see what it was gonna look like

blazerida88 · 10-24-2009, 12:39 PM

yea man round ur corners and make sure u cut enough in the back of the spring pocket so ur bag wont rub

Booger8993 · 10-25-2009, 08:22 AM

Quote: Originally Posted by blazerida88

yea man round ur corners and make sure u cut enough in the back of the spring pocket so ur bag wont rub

oh yea found out about the backs of the pockets. that was a b***h to do. but yea i think i got the corners rounded enough

Booger8993 · 10-25-2009, 08:22 AM

i'll post some more pics once i paint the frame area

Booger8993 · 10-28-2009, 04:39 PM

avs mounting brackets for the compressors

Booger8993 · 10-28-2009, 06:51 PM

Booger8993 · 10-28-2009, 06:53 PM

Booger8993 · 10-28-2009, 06:53 PM

the big brown truck came today...

Booger8993 · 10-28-2009, 06:56 PM

rough mock up

SHROP · 10-28-2009, 06:57 PM

lookin good

dontxtrust · 10-28-2009, 07:05 PM

looks good!

Wybrow · 10-28-2009, 07:15 PM

I mean this with all due respect, but I hate you.

Booger8993 · 10-28-2009, 07:33 PM

Quote: Originally Posted by Wybrow

I mean this with all due respect, but I hate you.

you hate me? lol c'mon

tsayyote · 10-28-2009, 09:15 PM

you gunna brace the valves on the tank? Buddy of mine has them just like that and has sprung a leak from a cracked weld at the bung on the tank from the weight of the valves and bumping around on crappy, uneven pavement.

Booger8993 · 10-29-2009, 12:46 AM

yea thats probably a good idea. any suggestions?

10-14-2009, 03:32 AM	#101
dontxtrust Registered User Age: 18 Join Date: Jun 2009 Posts: 343 Location: STERLING HGTS!! User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Quote: Originally Posted by tsayyote $400 but its on gas so the damn tank weighs more than the welder. but check craigslist. good deals there! yeh im not lookig for one right now but i need to buy one, i kinda stole my buddies from him...gotta give it back soon lol
	[Reply w/Quote]

10-14-2009, 03:17 PM	#102
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" yeah i've been lookin around for anything lol the only thing i've ever welded w/ is a damn ancient stick welder once! not too fun i must say. i'll find somethin eventually
	[Reply w/Quote]

10-14-2009, 10:24 PM	#103
mrroller Registered User Age: 19 Join Date: Apr 2007 Posts: 197 Location: Macomb, MI User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Quote: Originally Posted by dontxtrust yeh im not lookig for one right now but i need to buy one, i kinda stole my buddies from him...gotta give it back soon lol Yeah jerk when you gonna be done with that thing?! Jk man just take care of it lol. I will need it back once winter hits though, so I can work on my truck.
	[Reply w/Quote]

10-14-2009, 10:40 PM	#104
dontxtrust Registered User Age: 18 Join Date: Jun 2009 Posts: 343 Location: STERLING HGTS!! User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Quote: Originally Posted by mrroller Yeah jerk when you gonna be done with that thing?! Jk man just take care of it lol. I will need it back once winter hits though, so I can work on my truck. lol before winter! after that ill drive my truck to your house to weld hahah
	[Reply w/Quote]

10-15-2009, 08:55 PM	#105
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" a lil update fellas....
	[Reply w/Quote]

10-15-2009, 09:29 PM	#106
dontxtrust Registered User Age: 18 Join Date: Jun 2009 Posts: 343 Location: STERLING HGTS!! User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" nice! now get that front done hahha!!
	[Reply w/Quote]

10-15-2009, 10:06 PM	#107
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" oh yea thats gonna be the fun part lol i got the 4.3 motor in mine so everything's a lil more cramped. i haven't quite figured out what i'm gonna do with the wiring harness where the ecu and headlights come together. i mean its smack in the middle where the fire wall tub is gonna go lol
	[Reply w/Quote]

10-15-2009, 10:42 PM	#108
dontxtrust Registered User Age: 18 Join Date: Jun 2009 Posts: 343 Location: STERLING HGTS!! User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Quote: Originally Posted by Booger8993 oh yea thats gonna be the fun part lol i got the 4.3 motor in mine so everything's a lil more cramped. i haven't quite figured out what i'm gonna do with the wiring harness where the ecu and headlights come together. i mean its smack in the middle where the fire wall tub is gonna go lol lol goodluck
	[Reply w/Quote]

10-15-2009, 11:51 PM	#109
scott9001 Registered User Age: 19 Join Date: Jan 2007 Posts: 496 Location: Mitchell User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" hey man when you were talking about your valves you might as well go 1/2 to half becuase you will prob end up using less fittings, and for your dump if you get plugs for the end of the valve then you can drill a hole in the end to make it the speed you want it. its really hard to find a ride height with a 3/8 hole i find. i ahve a 1/4 hole drilled in mine, and if your pissin around in a parking lot you can pull the plug so you can go up and down real quick. btw its to bad you half to wait so long for the arms but they are nice. truck looks great man keep us informed.
	[Reply w/Quote]

10-16-2009, 12:03 AM	#110
8tninedime Registered User Age: 37 Join Date: Mar 2008 Posts: 276 Location: middle tn User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" you got a nice truck for sure....
	[Reply w/Quote]

10-16-2009, 12:14 AM	#111
tsayyote is rockin' out to Age: 23 Join Date: Feb 2007 Posts: 1,841 Location: Anaheim, Ca User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" You gunna color your arms or leave 'em raw finish?
	[Reply w/Quote]

10-16-2009, 12:55 AM	#112
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Quote: Originally Posted by scott9001 hey man when you were talking about your valves you might as well go 1/2 to half becuase you will prob end up using less fittings, and for your dump if you get plugs for the end of the valve then you can drill a hole in the end to make it the speed you want it. its really hard to find a ride height with a 3/8 hole i find. i ahve a 1/4 hole drilled in mine, and if your pissin around in a parking lot you can pull the plug so you can go up and down real quick. btw its to bad you half to wait so long for the arms but they are nice. truck looks great man keep us informed. hell yea i really like that idea i was plannin on running all 1/2" now that i've sat down and drawn everything out. but i never thought of pluggin it and then drillin a hole. i was jus gonna spend more $ and by the control/silencer that goes on the end but bump that. right on
	[Reply w/Quote]

10-16-2009, 12:56 AM	#113
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" thanks ya'll. yea i'm gonna take off the arms and paint em. i got some left over GM silver they shot the top of my two-tone w/ i was thinkin of doin that color but idk, might jus stick w/ black. i'll keep ya'll informed lol
	[Reply w/Quote]

10-16-2009, 02:17 PM	#114
scott9001 Registered User Age: 19 Join Date: Jan 2007 Posts: 496 Location: Mitchell User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Quote: Originally Posted by Booger8993 hell yea i really like that idea i was plannin on running all 1/2" now that i've sat down and drawn everything out. but i never thought of pluggin it and then drillin a hole. i was jus gonna spend more $ and by the control/silencer that goes on the end but bump that. right on becasue it really is a complete bitch trying to find a ride height when its quick.
	[Reply w/Quote]

10-16-2009, 09:00 PM	#115
tsayyote is rockin' out to Age: 23 Join Date: Feb 2007 Posts: 1,841 Location: Anaheim, Ca User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Quote: Originally Posted by Booger8993 hell yea i really like that idea i was plannin on running all 1/2" now that i've sat down and drawn everything out. but i never thought of pluggin it and then drillin a hole. i was jus gonna spend more $ and by the control/silencer that goes on the end but bump that. right on If you need mufflers, i got 8 of em and i'll be using 4 so I can sell the other 4 for $15 shipped. 1/2" thread about 4" in length.
	[Reply w/Quote]

10-17-2009, 02:16 AM	#116
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" alright cool. i'm not too sure yet what exactly i'm gonna go with but i'll def let ya know when i do. gonna try and get some cuttin done on the front saturday if i got time between work and school
	[Reply w/Quote]

10-17-2009, 03:24 AM	#117
S-10MASTER You can't say fuck Join Date: Jun 2006 Posts: 2,621 Location: 26.34°N 127.78°E -39.96Ft. User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Coming along pretty nice man. Can't wait to see this thing finished.
	[Reply w/Quote]

10-17-2009, 04:23 AM	#118
tsayyote is rockin' out to Age: 23 Join Date: Feb 2007 Posts: 1,841 Location: Anaheim, Ca User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Quote: Originally Posted by Booger8993 alright cool. i'm not too sure yet what exactly i'm gonna go with but i'll def let ya know when i do. gonna try and get some cuttin done on the front saturday if i got time between work and school no worries, they aint goin anywhere if anything i'll keep em as backups. if you ever need 'em hit me up on pm.
	[Reply w/Quote]

10-17-2009, 11:54 AM	#119
mylostsoul Registered User Age: 25 Join Date: Sep 2009 Posts: 69 Location: User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Quote: Originally Posted by dontxtrust good deal, i just went out to work on mine and i was movin the frame around and i dropped it on my finger... i think its broke and i might need stitches I KNOW HOW YOU FEEL!!! my first truck I bagged, and I ended up screwin up my 2.2 motor somehow ... well that was a good time to get a new bed, new motor and a back half ... Me and a buddy were taking ever thing apart and he moved the airline ... and I mean just moved it to get something outta the way ... PSST BAM!!! ... my foot was under the frame ... I dropped a socket and went to get it and on the way back up when it all happened ... and mind you ... my foot was not flat it was on the side ... so i guess I learned 2 lessons ... PTC Fittings FTW no more lowes/home depot things ... and 2 .. i guess all those years our parents hounded us about milk making our bones strong ... they werent lieing ... but on a better note ... GOOD WORK DUDE!
	[Reply w/Quote]

10-17-2009, 11:58 AM	#120
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Quote: Originally Posted by mylostsoul I KNOW HOW YOU FEEL!!! my first truck I bagged, and I ended up screwin up my 2.2 motor somehow ... well that was a good time to get a new bed, new motor and a back half ... Me and a buddy were taking ever thing apart and he moved the airline ... and I mean just moved it to get something outta the way ... PSST BAM!!! ... my foot was under the frame ... I dropped a socket and went to get it and on the way back up when it all happened ... and mind you ... my foot was not flat it was on the side ... so i guess I learned 2 lessons ... PTC Fittings FTW no more lowes/home depot things ... and 2 .. i guess all those years our parents hounded us about milk making our bones strong ... they werent lieing ... but on a better note ... GOOD WORK DUDE! lol dang dude that sucks BAD! lol yea i've heard bout never using those things you get from home depot and places like that but my buddy had a line blow out on his mazda in a parkin lot one time and that was our last resort. we had to cut that section of line out and filled it full of connectors and all sorts of fittins from LOWES lol. he barely made it home
	[Reply w/Quote]

10-17-2009, 01:13 PM	#121
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" a lil bit of primer the home-made paint rack lol
	[Reply w/Quote]

10-18-2009, 06:14 PM	#122
scott9001 Registered User Age: 19 Join Date: Jan 2007 Posts: 496 Location: Mitchell User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" what are you oging to do for paint?
	[Reply w/Quote]

10-18-2009, 08:06 PM	#123
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" prob silver
	[Reply w/Quote]

10-19-2009, 07:29 PM	#124
blazerida88 PHAT JOE Age: 21 Join Date: Mar 2006 Posts: 5,735 Location: birmingham alabama User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" looks good booger, have ya found a bed yet? i have been looking around down here for ya. this is marcus btw
	[Reply w/Quote]

10-19-2009, 08:55 PM	#125
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Quote: Originally Posted by blazerida88 looks good booger, have ya found a bed yet? i have been looking around down here for ya. this is marcus btw nah hadn't found a bed yet. i got some guy to call but i cant see his beds. i think he works for a junk yard or something. but yea its coming along, slowly but surely lol. i'm probably jus gonna throw this beat up back on and cut it up and all first, then find a good one later
	[Reply w/Quote]

10-20-2009, 01:48 PM	#126
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" well i've been tryin for three days now to paint the control arms but its been too freakin cold down here... it was a high of like 50 saturday and sunday. so maybe i'll be gettin em finished up today sometime ... ordered all my valves and switch box stuff yesterday too. should be here next week HOPEFULLY
	[Reply w/Quote]

10-20-2009, 03:38 PM	#127
erieinksdime91 Do Work Son! Age: 22 Join Date: Sep 2008 Posts: 138 Location: Sandusky, Ohio User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Keep up the good work bro! Looking sweet!
	[Reply w/Quote]

10-21-2009, 08:51 PM	#128
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" yanked the heat and a/c...
	[Reply w/Quote]

10-22-2009, 08:03 PM	#129
blazerida88 PHAT JOE Age: 21 Join Date: Mar 2006 Posts: 5,735 Location: birmingham alabama User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" cut it up man, i built a 93 just like urs that layed 20's, its in the baggin it section, project: first gen is the thread title, we actually just got the truck back for my bro
	[Reply w/Quote]

10-23-2009, 11:01 AM	#130
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" oh yea dude. cant wait i'm gonna try and get the spring pocets cut now. got all the lines run up front. still gotta figure out where i'm gonna move the e-brake and the harness mount on the driver side... but i jus got my driveshaft back - anyone got an idea of what angle to set the rear end... i'm wantin to think 3-5 degrees but i'm not exactly sure
	[Reply w/Quote]

10-23-2009, 04:18 PM	#131
dontxtrust Registered User Age: 18 Join Date: Jun 2009 Posts: 343 Location: STERLING HGTS!! User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" mines at 2 degrees at ride height
	[Reply w/Quote]

10-23-2009, 07:17 PM	#132
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" bout freakin time lol
	[Reply w/Quote]

10-23-2009, 07:18 PM	#133
Booger8993 Registered User Age: 20 Join Date: Aug 2009 Posts: 181 Location: hickory, NC User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter"
	[Reply w/Quote]

10-23-2009, 08:42 PM	#134
dontxtrust Registered User Age: 18 Join Date: Jun 2009 Posts: 343 Location: STERLING HGTS!! User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" Quote: Originally Posted by Booger8993 nice! looks good, did you flare you spring pockets?
	[Reply w/Quote]

10-23-2009, 10:30 PM	#135
V8Blaze V8 with bags Age: 24 Join Date: Apr 2003 Posts: 4,175 Location: baton rouge, LA User is: OffLine	Re: My '93 Dime Project - aka "The Cookie Cutter" dont leave those corners like that, they will crack. They need to rounded to spread the stress over the entire area
	[Reply w/Quote]