Most Hacked Shit Ever Seen 2009 Thread!!

[scootch]

man the tbird trunk looks so much better now. im glad we finally did it. now to rebuild his speaker box and make beauty panels wooo wooooo!

[Dragginbody]

Quote: Originally Posted by Mcfly Minis

welding to cast

looks like some nice waterjet cut metal and chrome but why the 15'' upper tri bars and 36'' lower bars

[So Low Roller]

Quote: Originally Posted by cpolaris502

I'm embarrassed to post these. This is from the 1st month that i had my rear bagged. At first i had no shocks, but then i discovered how much i needed them right away and this was the best idea i had at the time. I couldn't find shocks that were short enough when compressed and had the right amount of travel.


Then before i put the floor in I came up with the idea to use some axle shock mounts for my uppers. No more hacks on my truck lol.

just goes to show you "cory", if it can be broke, it fixed.

[statiknlayin]

ive been looking forward to anouther one of these thread's very entertaining

[statiknlayin]

A boy that lives near by done this the welds broke and he tried to jb weld it back together didn't work so well so then he put bolts in the side plates


{edit this was his DAILY driver and he drove it like this}

[B.I 559]

Quote: Originally Posted by statiknlayin

A boy that lives near by done this the welds broke and he tried to jb weld it back together didn't work so well so then he put bolts in the side plates


{edit this was his DAILY driver and he drove it like this}

any more pics?

[statiknlayin]

ill get some

[statiknlayin]

more pics as requested sadly all this and it didnt lay on 50 series 15s set like 2" off the ground

[MoKo CuStOmS]

i love the look of the aluminized paint. and the fart can

[MoKo CuStOmS]

Quote: Originally Posted by Dragginbody

looks like some nice waterjet cut metal and chrome but why the 15'' upper tri bars and 36'' lower bars

yea my only guess its not gonna be driven fast anywhere and only have 4 or 5inchs of travel cuz thats a hug diffence i didnt notice over all the waterjet stuff. so show only truck i guess. i hate when you cant drive a truck like a normal ride.

[Doc]

gotta love the custom look of the stock gas tank in the bed..

[Svaby]

[Svaby]

lol heres a video i found from dropt out 4

it was a guy in a blazer then my freind (chevypower) then me in the green truck haha

[Svaby]

http://s179.photobucket.com/albums/w...optOut4042.flv

lol i am the last one in this vid... im a ass hole

[Getbored]

the past three post... how are they hacks??

[Speedy2222]

did someone say they liked gas tanks in beds..

[s10sixteynine]

Quote: Originally Posted by Svaby

lol heres a video i found from dropt out 4

it was a guy in a blazer then my freind (chevypower) then me in the green truck haha

u mean the ones the crowd was telling to "take it home" and " are u serious get outta there"

[2DRTAHOE]

I believe they were referering to him not being low enough.IDK

[s10sixteynine]

Quote: Originally Posted by xtremedime00

I believe they were referering to him not being low enough.IDK

yea i know, the first truck in the one that is just a link is a member but i cant remember his name

[Chevy98]

Quote: Originally Posted by statiknlayin

more pics as requested sadly all this and it didnt lay on 50 series 15s set like 2" off the ground

when the guys finish this do they go "yah man this shit looks good" or like "those are some great welds i just did" lol

[dimerunner88]

exhaust i just took off my dime

[Something Different]

Quote: Originally Posted by Doc

gotta love the custom look of the stock gas tank in the bed..

We call it the DiRtY SoUtH state Flag! LOL!

[SSKJason]

i found this on youtube. im still trying to figure out what the lower bars are

http://www.youtube.com/watch?v=H8VlfFdmT7s

http://www.youtube.com/watch?v=sg-SasVRNyk

[rooster52478]

The lower bars are the stock trailing arms. And it doesn't really looked hacked to me. Could be cleaner for sure with some miter cuts, but other than that it looks ok.

[Getbored]

Quote: Originally Posted by rooster52478

The lower bars are the stock trailing arms. And it doesn't really looked hacked to me. Could be cleaner for sure with some miter cuts, but other than that it looks ok.

im sorry but that is not how you build a back half.....
i guess i wouldn t call it a total hack but poor execution

[s10sixteynine]

Quote: Originally Posted by SSKJason

i found this on youtube. im still trying to figure out what the lower bars are

http://www.youtube.com/watch?v=H8VlfFdmT7s

http://www.youtube.com/watch?v=sg-SasVRNyk

DO YOU THINK THE COMP'S ARE LOUD ENOUGH

and am i the only one to think that the bags on the trailing arms and those decent size tires, shouldnt he be getting more lift, it didnt even untuck

[kzeliminator]

before i knew what i was doing, listening to people who i thought knew what they were doing as well
old frame, old pics from my truck, you can check my thread to what it is now...lol

[SSKJason]

i thought he could have done a better job on the back half. like john said its just poorly executed

[Slammed83Mazda]

Quote: Originally Posted by SSKJason

i found this on youtube. im still trying to figure out what the lower bars are

http://www.youtube.com/watch?v=H8VlfFdmT7s

http://www.youtube.com/watch?v=sg-SasVRNyk

Thats gotta be the longest c notch I've ever seen.

[sadexcuse4s10]

damn that guy with the '64 had the wire speed fast enough. sumbitch sounded like he was welded on an iron frying pan

[slammedcavi]

Quote: Originally Posted by sadexcuse4s10

damn that guy with the '64 had the wire speed fast enough. sumbitch sounded like he was welded on an iron frying pan

Bwahahahahahahahah

[DFitty]

sounded like dippin a hot ass pan in cold water

[MoKo CuStOmS]

http://www.weldingtipsandtricks.com/...t-to-weld.html

found this awesome welding video. i think all the people who built the trucks in the 2008 thread must have watched this video.

this guy is truly a hack himself!

[pack of q tips]

wow im not a welder buy any means nor do i try to weld stuff but im sure i can weld better than that guy

[radarblue95]

yeah that video is pretty funny

[MoKo CuStOmS]

my favorite part is when he says always weld with the minimum amount of heat. you should always turn the heat up until your burning through or can visually see enough penetration. and then turn it down a hair so theres no blow through. and when he says just grind it off and your done is pretty funny. i was hopeing he would grind it off so it would fall apart lol.

[biebs96]

Quote: Originally Posted by Speedy2222

not really a hack.. but definitely NOT the right way to do it..

where is this truck from?
went to hs with a kid with that truck

[BICHEN60]

Quote: Originally Posted by MoKo CuStOmS

http://www.weldingtipsandtricks.com/...t-to-weld.html

found this awesome welding video. i think all the people who built the trucks in the 2008 thread must have watched this video.

this guy is truly a hack himself!

my g/f can weld better then that guy!

[DFitty]

hahah that vid is hillarious. but the site is good lol.

[andizzle]

how many times did he brush off his hands

[s10sixteynine]

Quote: Originally Posted by andizzle

how many times did he brush off his hands

i was like how dirty is that welder

[SaltyOnionBalls]

Quote: Originally Posted by kdknebel

not really hacked just dumb

thay just painted over the lights thay didnt shaved em

Seen that one too many times down here lol

[Pure_Hatred]

on a ford from around here

[DFitty]

wow,that ford is fvckin awesome

[DFitty]

sweet pinion angle too. is that a squarebody ford?

[Pure_Hatred]

like a 02 body style

[jakefiddlesticks]

F.O.R.D

Focking Oakies Really Dig'em

[wildman ss]

we're they going to make it into a 4 link and just quit halfway through?

[DFitty]

Quote: Originally Posted by Pure_Hatred

like a 02 body style

any pics of the truck..

[Pure_Hatred]