LSOH bump steer/steering kit group buy, AGAIN!!!

mikes90cr250 · 05-29-2012, 02:32 PM

im looking to get a raw set how much for shipping to barrie ont canada L4N5A8

cks10 · 05-29-2012, 04:30 PM

contact little shop of horrors , group buy has ended . even at retail its worth every penny

jminzler · 05-31-2012, 03:33 AM

does anybody have any pics of before and after install on how much of a difference it makes. just curious to see it....

layinbody31 · 05-31-2012, 03:40 PM

I love how easy it is to adjust these! Switched from lift to stock spindles and had to toe it out 1". Did it in a matter of minutes using some clamps, boards, and a tape measure to check it all

Although with several thousand miles on it, my heims are REALLY free moving. No slop in them that I could tell of, but very little friction to them. Not sure if that's a good or bad thing...

WaY2LoW98 · 06-28-2012, 12:32 PM

X2 please!!

Quote: Originally Posted by jminzler

does anybody have any pics of before and after install on how much of a difference it makes. just curious to see it....

geneticrider13 · 08-14-2012, 01:20 AM

Is there any chance of a 3rd group buy in the near future? I'd be really interested in this, I might even get two right away!

kruzer22 · 08-14-2012, 03:50 PM

copied from gimps build thread. hope he dont mind

blake293209 · 08-14-2012, 04:50 PM

He posted the same pic one page back.

monster 98 s-10 · 08-14-2012, 05:17 PM

Quote: Originally Posted by geneticrider13

Is there any chance of a 3rd group buy in the near future? I'd be really interested in this, I might even get two right away!

xx2

Dmbh09 · 08-14-2012, 05:45 PM

Quote: Originally Posted by geneticrider13

is there any chance of a 3rd group buy in the near future? I'd be really interested in this, i might even get two right away!

xx3

Gimp · 08-14-2012, 08:50 PM

Quote: Originally Posted by kruzer22

copied from gimps build thread. hope he dont mind

Nope I dont mind at all However these pics were when the centerlink was installed IMPROPERLY!!! The heims are meant to be at the back and at this point I had the centerlink on BACKWORDS!!! GET_LOW quickly helped me figure that out and I turned the centerlink around. DO NOT install yours with the inner heim joins faced forward like this!

1low4x4 · 08-14-2012, 09:31 PM

X4 if we got enough people in to bring the price down a little bit id be in!!

MajesticDime · 08-15-2012, 03:09 AM

Quote: Originally Posted by 1low4x4

X4 if we got enough people in to bring the price down a little bit id be in!!

X5 the more the better

kruzer22 · 08-15-2012, 09:31 AM

x6 im down for one. hook us up Eric!

Lutz · 08-15-2012, 05:37 PM

finally got the front on the ground, and the tie rods are holding me up. knew i shoulda hopped on this, or even the first one. soo...

x7!

1low4x4 · 08-15-2012, 11:39 PM

That's 7 people in under 48 hours......

Chances are gettin better!

Gimp · 08-16-2012, 06:33 PM

Damn you guys sure are haulin for another group buy. Keep it going!
Bump for you!
This is how the centerlink should look. Big pic

longest13 · 08-16-2012, 06:43 PM

X8-F**k it I'm in too! Def in for a price drop.

wagonproject · 08-16-2012, 08:45 PM

I talked to Eric and he said, "I'd be down for it if there were at least 10 or so interested people. Pricing would be like the last one which I believe dropped at 10 peeps. I'm actually working on a couple of improvements to the parts as well but they will still look about the same. (chromoly for the pitman arm shaft since it sees most of the load, stress risers further minimized in the other machined parts) Keep in touch and let me know what the others say."

jburton_55 · 08-16-2012, 09:16 PM

x9 count me in...

lowridinrebel · 08-17-2012, 12:53 AM

Number 10 B****es, redoing the front end so why not

sosolos10 · 08-17-2012, 01:30 AM

damn wish i had the cash

Lutz · 08-17-2012, 03:10 AM

nice, gettin in on the reworked version!

ravenmachine · 08-17-2012, 06:35 PM

x11?

Was only planning on running 18s but found a deal on 20" Boss 335s and I dont like the tow change now, plus, a guy will probably save the cost of this on tires alone. Now to start saving. haha.

ridinlow · 08-19-2012, 02:52 AM

I'm so damn lazy that I still have to put mine on. And I got mine in the first group buy.

blake293209 · 08-19-2012, 02:53 AM

Quote: Originally Posted by Lutz

nice, gettin in on the reworked version!

hmm?

Gimp · 08-19-2012, 12:08 PM

Quote: Originally Posted by ridinlow

I'm so damn lazy that I still have to put mine on. And I got mine in the first group buy.

you had the blue one with a little powder coat inside the tirerod tubes right. did wire brushing the inside work?

ridinlow · 08-19-2012, 12:40 PM

Quote: Originally Posted by Gimp

you had the blue one with a little powder coat inside the tirerod tubes right. did wire brushing the inside work?

Yeah the wire brush worked.

Gimp · 08-19-2012, 01:00 PM

^^ get that thing on there man.

Nineanddown · 08-19-2012, 04:40 PM

X12 Cash in hand I'll take a set of these! Give me a date and I'll take em!

longest13 · 08-19-2012, 06:25 PM

Hell yeah keep em coming

Lutz · 08-20-2012, 04:15 PM

Quote: Originally Posted by blake293209

hmm?

Quote: Originally Posted by wagonproject

I talked to Eric and he said, "I'd be down for it if there were at least 10 or so interested people. Pricing would be like the last one which I believe dropped at 10 peeps. I'm actually working on a couple of improvements to the parts as well but they will still look about the same. (chromoly for the pitman arm shaft since it sees most of the load, stress risers further minimized in the other machined parts) Keep in touch and let me know what the others say."

...

Geat · 08-20-2012, 08:29 PM

Quote: Originally Posted by Lutz

...

Eric and I have been throwing the idea around. I'm half way through coping another batch right now, but I have to leave for school tomorrow night.

EDIT: I was thinking today, Ive done nearly 150 of these damn things.

badmofo529 · 08-20-2012, 08:59 PM

depending on when the group buy happens i might be down as well

LVStreetterror · 08-22-2012, 04:41 PM

Depending on the wait time and what the total cost is to my door I am interested also. Any details on this group buy from the person that my payment will go to ?

baller102787 · 08-22-2012, 05:41 PM

i would be in to... just keep me in touch cash in hand

shaved_sonoma · 08-22-2012, 07:54 PM

x13 I am interested

joelmk3 · 08-22-2012, 08:38 PM

X14

95v8sdime · 08-24-2012, 10:05 AM

X15

xxcov3rxx · 08-24-2012, 10:53 AM

I just wanted to stop in and say how ****ing awesome my LSOH steering linkage is! i lay front crossmember in a 4 door blazer and the tie rods dont touch my frame with 245/35/20 tires. I also get a good turning radious. For those who dont have one... Get one...

This is with front crossmember on the ground.

mattadams13 · 08-24-2012, 01:10 PM

^^^^^ Whats the backspacing and width of your front wheels? Also i would be down for this if it was going on around november.

xxcov3rxx · 08-24-2012, 01:30 PM

Something like 4"bs and 9"wide... didn't really measure them much.. They fit the first time.

Gimp · 08-24-2012, 02:15 PM

^^Wheels are bad ass!

2099sdime · 08-24-2012, 11:23 PM

x16 when does payment have to be in and when will kits go out for delivery

SCRPENBY · 08-26-2012, 03:06 PM

Finally got my A-arms in so once they get back from powder coat i'll finally be able to install my LSoH setup.

I cant wait! well i have to find the time too...working 6 days a week till christmas.

joelmk3 · 08-26-2012, 04:35 PM

Quote: Originally Posted by 2099sdime

x16 when does payment have to be in and when will kits go out for delivery

Yeah was wondering the same thing! Been hustling and selling shit all week to get the extra cash for this!!!!! Now I want to give it to someone!!!!!

LVStreetterror · 08-27-2012, 02:18 AM

My paypal is ready is the "man in charge" gonna speak up and give us some directions ?

Lutz · 08-27-2012, 05:30 PM

By the looks of it, some one needs to start a new thread for the next group buy..

wagonproject · 08-27-2012, 06:07 PM

Sent Eric a message, just waiting to hear back from him.

Geat · 08-29-2012, 11:34 AM

Quote: Originally Posted by Lutz

By the looks of it, some one needs to start a new thread for the next group buy..

Im working on it. Eric and I are still working out the logistics of it. We have been tossing around ideas to make the whole process smoother.

05-29-2012, 02:32 PM	#351
mikes90cr250 Registered User Age: 27 Join Date: Mar 2008 Posts: 93 Location: User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! im looking to get a raw set how much for shipping to barrie ont canada L4N5A8
	[Reply w/Quote]

05-29-2012, 04:30 PM	#352
cks10 Registered User Age: 36 Join Date: Feb 2012 Posts: 44 Location: User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! contact little shop of horrors , group buy has ended . even at retail its worth every penny
	[Reply w/Quote]

05-31-2012, 03:33 AM	#353
jminzler Registered User Join Date: Jun 2007 Posts: 279 Location: south of columbus,oh User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! does anybody have any pics of before and after install on how much of a difference it makes. just curious to see it....
	[Reply w/Quote]

05-31-2012, 03:40 PM	#354
layinbody31 Lifted 2wd & Bodied 4x4 Age: 27 Join Date: Jul 2004 Posts: 13,265 Location: Cedar Lake, IN User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! I love how easy it is to adjust these! Switched from lift to stock spindles and had to toe it out 1". Did it in a matter of minutes using some clamps, boards, and a tape measure to check it all Although with several thousand miles on it, my heims are REALLY free moving. No slop in them that I could tell of, but very little friction to them. Not sure if that's a good or bad thing...
	[Reply w/Quote]

06-28-2012, 12:32 PM	#355
WaY2LoW98 Registered User Join Date: Jan 2012 Posts: 23 Location: User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! X2 please!! Quote: Originally Posted by jminzler does anybody have any pics of before and after install on how much of a difference it makes. just curious to see it....
	[Reply w/Quote]

08-14-2012, 01:20 AM	#356
geneticrider13 real names Chris Join Date: Jul 2006 Posts: 815 Location: Allentown, PA User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Is there any chance of a 3rd group buy in the near future? I'd be really interested in this, I might even get two right away!
	[Reply w/Quote]

08-14-2012, 03:50 PM	#357
kruzer22 Registered User Age: 28 Join Date: Apr 2010 Posts: 106 Location: statesboro GA User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! copied from gimps build thread. hope he dont mind
	[Reply w/Quote]

08-14-2012, 04:50 PM	#358
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,614 Location: Conyers, GA User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! He posted the same pic one page back.
	[Reply w/Quote]

08-14-2012, 05:17 PM	#359
monster 98 s-10 BOOBIES Age: 21 Join Date: Jan 2010 Posts: 1,463 Location: Flint,MI User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Quote: Originally Posted by geneticrider13 Is there any chance of a 3rd group buy in the near future? I'd be really interested in this, I might even get two right away! xx2
	[Reply w/Quote]

08-14-2012, 05:45 PM	#360
Dmbh09 gettin layed Age: 30 Join Date: Jul 2010 Posts: 786 Location: Summerville, SC User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Quote: Originally Posted by geneticrider13 is there any chance of a 3rd group buy in the near future? I'd be really interested in this, i might even get two right away! xx3
	[Reply w/Quote]

08-14-2012, 08:50 PM	#361
Gimp out draggin.. brb Age: 28 Join Date: May 2008 Posts: 6,708 Location: CT User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Quote: Originally Posted by kruzer22 copied from gimps build thread. hope he dont mind Nope I dont mind at all However these pics were when the centerlink was installed IMPROPERLY!!! The heims are meant to be at the back and at this point I had the centerlink on BACKWORDS!!! GET_LOW quickly helped me figure that out and I turned the centerlink around. DO NOT install yours with the inner heim joins faced forward like this!
	[Reply w/Quote]

08-14-2012, 09:31 PM	#362
1low4x4 Registered User Join Date: Apr 2011 Posts: 2,707 Location: SL,UT User is: OffLine	X4 if we got enough people in to bring the price down a little bit id be in!!
	[Reply w/Quote]

08-15-2012, 03:09 AM	#363
MajesticDime S10 Nick Age: 31 Join Date: Jun 2005 Posts: 354 Location: NE User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Quote: Originally Posted by 1low4x4 X4 if we got enough people in to bring the price down a little bit id be in!! X5 the more the better
	[Reply w/Quote]

08-15-2012, 09:31 AM	#364
kruzer22 Registered User Age: 28 Join Date: Apr 2010 Posts: 106 Location: statesboro GA User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! x6 im down for one. hook us up Eric!
	[Reply w/Quote]

08-15-2012, 05:37 PM	#365
Lutz Proud Canadian Join Date: Sep 2010 Posts: 815 Location: Regina, Saskatchewan, Canada User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! finally got the front on the ground, and the tie rods are holding me up. knew i shoulda hopped on this, or even the first one. soo... x7!
	[Reply w/Quote]

08-15-2012, 11:39 PM	#366
1low4x4 Registered User Join Date: Apr 2011 Posts: 2,707 Location: SL,UT User is: OffLine	That's 7 people in under 48 hours...... Chances are gettin better!
	[Reply w/Quote]

08-16-2012, 06:33 PM	#367
Gimp out draggin.. brb Age: 28 Join Date: May 2008 Posts: 6,708 Location: CT User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Damn you guys sure are haulin for another group buy. Keep it going! Bump for you! This is how the centerlink should look. Big pic
	[Reply w/Quote]

08-16-2012, 06:43 PM	#368
longest13 92 Longbed Join Date: Mar 2006 Posts: 89 Location: Wilmington, IL User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! X8-F**k it I'm in too! Def in for a price drop.
	[Reply w/Quote]

08-16-2012, 08:45 PM	#369
wagonproject Short Bus Anonymous Age: 25 Join Date: Sep 2003 Posts: 7,029 Location: Kalamazoo, MI User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! I talked to Eric and he said, "I'd be down for it if there were at least 10 or so interested people. Pricing would be like the last one which I believe dropped at 10 peeps. I'm actually working on a couple of improvements to the parts as well but they will still look about the same. (chromoly for the pitman arm shaft since it sees most of the load, stress risers further minimized in the other machined parts) Keep in touch and let me know what the others say."
	[Reply w/Quote]

08-16-2012, 09:16 PM	#370
jburton_55 98sdime Age: 31 Join Date: Feb 2005 Posts: 131 Location: Plainfield IL User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! x9 count me in...
	[Reply w/Quote]

08-17-2012, 12:53 AM	#371
lowridinrebel Livin Life Low! Age: 30 Join Date: Apr 2005 Posts: 754 Location: Montreal Quebec, Canada User is: Online	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Number 10 B****es, redoing the front end so why not
	[Reply w/Quote]

08-17-2012, 01:30 AM	#372
sosolos10 Mine Drags The Ground Age: 29 Join Date: Feb 2008 Posts: 831 Location: Augusta WV User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! damn wish i had the cash
	[Reply w/Quote]

08-17-2012, 03:10 AM	#373
Lutz Proud Canadian Join Date: Sep 2010 Posts: 815 Location: Regina, Saskatchewan, Canada User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! nice, gettin in on the reworked version!
	[Reply w/Quote]

08-17-2012, 06:35 PM	#374
ravenmachine Registered User Age: 31 Join Date: Jan 2008 Posts: 39 Location: Moose Jaw, Saskatchewan User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! x11? Was only planning on running 18s but found a deal on 20" Boss 335s and I dont like the tow change now, plus, a guy will probably save the cost of this on tires alone. Now to start saving. haha.
	[Reply w/Quote]

08-19-2012, 02:52 AM	#375
ridinlow SMURF Join Date: May 2008 Posts: 1,358 Location: Bethalto IL User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! I'm so damn lazy that I still have to put mine on. And I got mine in the first group buy.
	[Reply w/Quote]

08-19-2012, 02:53 AM	#376
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,614 Location: Conyers, GA User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Quote: Originally Posted by Lutz nice, gettin in on the reworked version! hmm?
	[Reply w/Quote]

08-19-2012, 12:08 PM	#377
Gimp out draggin.. brb Age: 28 Join Date: May 2008 Posts: 6,708 Location: CT User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Quote: Originally Posted by ridinlow I'm so damn lazy that I still have to put mine on. And I got mine in the first group buy. you had the blue one with a little powder coat inside the tirerod tubes right. did wire brushing the inside work?
	[Reply w/Quote]

08-19-2012, 12:40 PM	#378
ridinlow SMURF Join Date: May 2008 Posts: 1,358 Location: Bethalto IL User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Quote: Originally Posted by Gimp you had the blue one with a little powder coat inside the tirerod tubes right. did wire brushing the inside work? Yeah the wire brush worked.
	[Reply w/Quote]

08-19-2012, 01:00 PM	#379
Gimp out draggin.. brb Age: 28 Join Date: May 2008 Posts: 6,708 Location: CT User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! ^^ get that thing on there man.
	[Reply w/Quote]

08-19-2012, 04:40 PM	#380
Nineanddown Registered User Age: 24 Join Date: Jul 2012 Posts: 23 Location: User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! X12 Cash in hand I'll take a set of these! Give me a date and I'll take em!
	[Reply w/Quote]

08-19-2012, 06:25 PM	#381
longest13 92 Longbed Join Date: Mar 2006 Posts: 89 Location: Wilmington, IL User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Hell yeah keep em coming
	[Reply w/Quote]

08-20-2012, 04:15 PM	#382
Lutz Proud Canadian Join Date: Sep 2010 Posts: 815 Location: Regina, Saskatchewan, Canada User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Quote: Originally Posted by blake293209 hmm? Quote: Originally Posted by wagonproject I talked to Eric and he said, "I'd be down for it if there were at least 10 or so interested people. Pricing would be like the last one which I believe dropped at 10 peeps. I'm actually working on a couple of improvements to the parts as well but they will still look about the same. (chromoly for the pitman arm shaft since it sees most of the load, stress risers further minimized in the other machined parts) Keep in touch and let me know what the others say." ...
	[Reply w/Quote]

08-20-2012, 08:29 PM	#383
Geat has 22's now Join Date: Aug 2005 Posts: 3,612 Location: Knoxville, TN User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Quote: Originally Posted by Lutz ... Eric and I have been throwing the idea around. I'm half way through coping another batch right now, but I have to leave for school tomorrow night. EDIT: I was thinking today, Ive done nearly 150 of these damn things.
	[Reply w/Quote]

08-20-2012, 08:59 PM	#384
badmofo529 y'all suck dicks Age: 21 Join Date: Nov 2010 Posts: 2,586 Location: Flint, MI User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! depending on when the group buy happens i might be down as well
	[Reply w/Quote]

08-22-2012, 04:41 PM	#385
LVStreetterror Registered User Age: 31 Join Date: Jan 2012 Posts: 277 Location: Las Vegas User is: OffLine	Re: LSOH bump steer/steering kit group buy, AGAIN!!! Depending on the wait time and what the total cost is to my door I am interested also. Any details on this group buy from the person that my payment will go to ?
	[Reply w/Quote]