Drag blocks! - S-10 Forum
 
LinkBack Thread Tools
post #1 of 31 Old 05-01-2012, 03:45 PM Thread Starter
Registered User
 
Join Date: Jan 2011
Age: 24
Posts: 97

User is: mikeh918 is offline
Drag blocks!

I need help, does anyone know the difference between side mount and under-frame mounts? Also, I'm not layin frame, will the blocks be able to reach the ground? Or will I have to modify them to work?

mikeh918 is offline  
Sponsored Links
Advertisement
 
post #2 of 31 Old 05-01-2012, 04:03 PM
Registered Asshole
 
rstadelmaier's Avatar
 
Join Date: Jan 2012
Location: Pittsburgh
Posts: 1,059

User is: rstadelmaier is offline
Re: Drag blocks!

You just said the difference



because i just can't be normal>>> http://www.s10forum.com/forum/f125/p...ckhalf-488914/
rstadelmaier is offline  
post #3 of 31 Old 05-01-2012, 04:04 PM
Negative 10
 
illest G's Avatar
 
Join Date: May 2007
Location: vacaville
Age: 28
Posts: 22,389

User is: illest G is offline
Re: Drag blocks!

well the side mounts. mount to the side of the frame. and the under frame mounts...mount on the underside of the frame. and how far are you from laying? typically drag blocks will either hold people up from laying frame. (that already do normally lay frame) since it sits lower than the frame. or they mount them in the back of the truck so that they only touch the ground when the front is aired up and the rear is dumped. personally i would get the truck laid out first. atleast the rear. before i thought about dragging

~KENNY~
MY GAL---->PROJECT THREAD<----MY GAL
illest G is offline  
post #4 of 31 Old 05-01-2012, 10:36 PM Thread Starter
Registered User
 
Join Date: Jan 2011
Age: 24
Posts: 97

User is: mikeh918 is offline
Re: Drag blocks!

I'm about an inch and a half off the ground. I do plan on laying frame when i get the money, but not yet. would it make more sense to get the side mount blocks so I could lower the blocks a bit more?
mikeh918 is offline  
post #5 of 31 Old 05-01-2012, 11:04 PM
4 bangin and love it
 
squareterror's Avatar
 
Join Date: Mar 2010
Location: Mt Washington, Ky
Age: 23
Posts: 1,367

User is: squareterror is offline
Re: Drag blocks!

It would make more sense to worry about laying the truck out the right way first, then use whichever works better for your particular application in the back. From the few trucks I've done, front mount makes it way too sketchy trying to steer.

Personally, I prefer frame plating over blocks. Think about what the block is doing. Say your truck weighs 4000lbs, and that you have a perfect 50/50 distribution(just to make it easier) if you drag the rear frame itself, you are dragging 2000lbs on a say a 1.5ft by 3in rail, on both sides. If you drag blocks, you are concentrating that same 2000lbs on two 2"x4" sections.

That equates to more stress on the blocks, the mounts, and the frame itself. More sess increases the likelyhood of a part failure, and when your talking bout a 4-7lb chunk of steel, shite gets real dangerous, real fast. The last thing we need as a mini community is more people doing thing in a dangerous manner.

Just my .02, I am open to positive and negative critisim, differing opinions, points of view

95 Civic coupe-RHD swapped, b16a/y21, bordeux red/captiva blue, dumped on 17's, just a daily/family car

03 QX4-litteraly bone stock. Wife's daily, and im not allowed to touch it.lol

93 Del Sol SI-FF time attack/daily build in progress. we'll see what all happens as it goes.lol
squareterror is offline  
post #6 of 31 Old 05-03-2012, 08:53 PM
Registered User
 
Join Date: Mar 2012
Location: Oklahoma City
Age: 29
Posts: 71

User is: joeyhambags is offline
Re: Drag blocks!

where would be the best place to mount the frame plates/what kind of metal do you prefer? I'm Latin frame and really want to throw some dope color sparks
joeyhambags is offline  
post #7 of 31 Old 05-03-2012, 10:52 PM
4 bangin and love it
 
squareterror's Avatar
 
Join Date: Mar 2010
Location: Mt Washington, Ky
Age: 23
Posts: 1,367

User is: squareterror is offline
Re: Drag blocks!

you plate whatever part of the frame you drag. if you drag under the doors, plate under the doors, if you drag under the bed, plate that. what ever you drag most, plate it up. i used 1/4 plate, cause if i was drivin, most of the time, i was draggin.

different metals will give different color sparks, but imo, titanium is the best looking. its like 4th of july weekend behind you, and its bright white. hella expensive and doesnt last long though. also, hard to weld for plating.


95 Civic coupe-RHD swapped, b16a/y21, bordeux red/captiva blue, dumped on 17's, just a daily/family car

03 QX4-litteraly bone stock. Wife's daily, and im not allowed to touch it.lol

93 Del Sol SI-FF time attack/daily build in progress. we'll see what all happens as it goes.lol
squareterror is offline  
post #8 of 31 Old 05-03-2012, 11:37 PM
Registered User
 
Join Date: Mar 2012
Location: Oklahoma City
Age: 29
Posts: 71

User is: joeyhambags is offline
Re: Drag blocks!

Dope! I'm def looking further into the frame plates thanks man for the info and that video is sick! didn't mean to highjack your thread @Mikeh it just
makes more sense to do frame plates instead of drag blocks I'm thinking. plus less o a chance of owing somebody for body work or a windshield for a chunk of metal blasting through a car behind ya
joeyhambags is offline  
post #9 of 31 Old 05-04-2012, 06:40 AM
Registered Asshole
 
rstadelmaier's Avatar
 
Join Date: Jan 2012
Location: Pittsburgh
Posts: 1,059

User is: rstadelmaier is offline
Re: Drag blocks!

only reason i'd prefer drag blocks is that they can last alot longer, especially if you make them adjustable as they wear. 1/4" plates are fine, but you gotta make sure you check them all the time so you're not worn through. titanium is awesome, magnesium too, but for the price, and you're just dragging them off. my opinion it's not worth the sparks.



because i just can't be normal>>> http://www.s10forum.com/forum/f125/p...ckhalf-488914/
rstadelmaier is offline  
post #10 of 31 Old 05-04-2012, 04:30 PM
4 bangin and love it
 
squareterror's Avatar
 
Join Date: Mar 2010
Location: Mt Washington, Ky
Age: 23
Posts: 1,367

User is: squareterror is offline
Re: Drag blocks!

I would not do magnesium, since it is a flammable metal.

Just my opinion though

95 Civic coupe-RHD swapped, b16a/y21, bordeux red/captiva blue, dumped on 17's, just a daily/family car

03 QX4-litteraly bone stock. Wife's daily, and im not allowed to touch it.lol

93 Del Sol SI-FF time attack/daily build in progress. we'll see what all happens as it goes.lol
squareterror is offline  
post #11 of 31 Old 05-06-2012, 02:10 AM
Registered User
 
theonedub's Avatar
 
Join Date: Aug 2007
Location: Northern CA
Posts: 547

User is: theonedub is offline
Re: Drag blocks!

Where is the best place to buy the under frame titanium blocks? Having a hard time finding them- would prefer to order from a well known/reputable online shop.


OEM C6 Wheels | KP 6 Link | Dominator 2500/2600 | AZ OB2 | SMC Valves
theonedub is offline  
post #12 of 31 Old 05-08-2012, 09:42 AM Thread Starter
Registered User
 
Join Date: Jan 2011
Age: 24
Posts: 97

User is: mikeh918 is offline
Re: Drag blocks!

It's all good, I was just hoping for an inexpensive way to drag until I can afford the notch and 4link set up
mikeh918 is offline  
post #13 of 31 Old 05-08-2012, 10:14 AM
Pneumatic Fanatic
 
Join Date: Jun 2007
Posts: 489

User is: Custom Connection is offline
Re: Drag blocks!

Quote:
Originally Posted by theonedub View Post
Where is the best place to buy the under frame titanium blocks? Having a hard time finding them- would prefer to order from a well known/reputable online shop.
Bam
http://thecustomconnectiononline.com...c6e102389e991c
Custom Connection is offline  
post #14 of 31 Old 05-08-2012, 11:24 AM
<SEVERED TIES>
 
DUTN@GAUGE's Avatar
 
Join Date: Mar 2007
Location: Mooresville, IN
Posts: 2,987

User is: DUTN@GAUGE is offline
Send a message via Yahoo to DUTN@GAUGE
DUTN@GAUGE is offline  
post #15 of 31 Old 05-08-2012, 02:23 PM
Registered User
 
JeremyCollins13's Avatar
 
Join Date: Mar 2010
Age: 26
Posts: 2,925

User is: JeremyCollins13 is offline
Re: Drag blocks!

am I the one 1 who realized its cheaper to buy the blocks and mounts seperately from Custom Connection.... isnt it usually the other way around?
JeremyCollins13 is offline  
post #16 of 31 Old 05-08-2012, 04:48 PM
Pneumatic Fanatic
 
Join Date: Jun 2007
Posts: 489

User is: Custom Connection is offline
Re: Drag blocks!

You got it backwards man. It IS cheaper to buy the complete set than to buy it all separate. The blocks are sold individually as stated on the website. $50 bucks for complete set
Custom Connection is offline  
post #17 of 31 Old 05-08-2012, 05:20 PM
Registered User
 
JeremyCollins13's Avatar
 
Join Date: Mar 2010
Age: 26
Posts: 2,925

User is: JeremyCollins13 is offline
Re: Drag blocks!

I was going off the $60 price. The separate components are $52.
JeremyCollins13 is offline  
post #18 of 31 Old 05-08-2012, 05:35 PM
Petitioning Low Rollers
 
mazdawg09's Avatar
 
Join Date: Jul 2011
Location: smyrna, DE
Age: 20
Posts: 465

User is: mazdawg09 is offline
Re: Drag blocks!

i saw somewhere that copper thows some sick sparks i tried looking for a video but i couldnt find one

Check out Lowrollers.com
PROJECTS:
white 01 2.2 ext cab(on air)
orange 91 mazda b2600(also on air)
WTB:
00 envoy front bumper
mazdawg09 is offline  
post #19 of 31 Old 05-08-2012, 05:39 PM
Pneumatic Fanatic
 
Join Date: Jun 2007
Posts: 489

User is: Custom Connection is offline
Re: Drag blocks!

Quote:
Originally Posted by JeremyCollins13 View Post
I was going off the $60 price. The separate components are $52.
You only got one block dude lol
Custom Connection is offline  
post #20 of 31 Old 05-08-2012, 06:18 PM
Registered User
 
JeremyCollins13's Avatar
 
Join Date: Mar 2010
Age: 26
Posts: 2,925

User is: JeremyCollins13 is offline
Re: Drag blocks!

O I C. WAY off on the price then. Holy crap.
JeremyCollins13 is offline  
post #21 of 31 Old 05-08-2012, 08:22 PM
Registered User
 
theonedub's Avatar
 
Join Date: Aug 2007
Location: Northern CA
Posts: 547

User is: theonedub is offline
Re: Drag blocks!

Quote:
Originally Posted by Custom Connection View Post
Quote:
Originally Posted by DUTN@GAUGE View Post
Thanks a lot for the links, guys. Do either of you sell the titanium blocks for the bright white sparks? Want to get them delivered by the 15th. Thanks.


OEM C6 Wheels | KP 6 Link | Dominator 2500/2600 | AZ OB2 | SMC Valves
theonedub is offline  
post #22 of 31 Old 05-08-2012, 08:44 PM
Pneumatic Fanatic
 
Join Date: Jun 2007
Posts: 489

User is: Custom Connection is offline
Re: Drag blocks!

Ti blocks dont last very long and are more $$ so we dont build them. I have had a few guys ask for them lately so I'm thinking about doing them in the future. If you can round up a few buddys and get at least 3-4 others on board I will go ahead and get some ti and start on them. As for the 15th...That would be pushing it
Custom Connection is offline  
post #23 of 31 Old 05-08-2012, 09:29 PM
Petitioning Low Rollers
 
mazdawg09's Avatar
 
Join Date: Jul 2011
Location: smyrna, DE
Age: 20
Posts: 465

User is: mazdawg09 is offline
Re: Drag blocks!

doesnt copper make green sparks? im pretty sure that would be cooler than white ones

Check out Lowrollers.com
PROJECTS:
white 01 2.2 ext cab(on air)
orange 91 mazda b2600(also on air)
WTB:
00 envoy front bumper
mazdawg09 is offline  
post #24 of 31 Old 05-08-2012, 09:37 PM
Registered User
 
Eight433's Avatar
 
Join Date: Oct 2004
Location: Birch Run, Michigan
Age: 31
Posts: 4,176

User is: Eight433 is offline
Re: Drag blocks!

I don't see copper sparking very well. It is so soft, it would grind off as soon as it hit the road too. Not to mention, it got SPENDY in the last couple years...

-2011 Silverado Regular Cab Short Box 5.3 6 speed auto 4wd
-67 Cadillac Deville on air
-2000 RoadStar Silverado 1600
Eight433 is offline  
post #25 of 31 Old 05-08-2012, 09:50 PM
Registered User
 
badmofo529's Avatar
 
Join Date: Nov 2010
Location: Flint, MI
Age: 24
Posts: 2,685

User is: badmofo529 is offline
Re: Drag blocks!

Quote:
Originally Posted by Eight433 View Post
I don't see copper sparking very well. It is so soft, it would grind off as soon as it hit the road too. Not to mention, it got SPENDY in the last couple years...
x2. it would just shave off, or break and become a copper projectile.
badmofo529 is offline  
post #26 of 31 Old 05-08-2012, 10:47 PM
I drive
 
SoloSDN's Avatar
 
Join Date: Jul 2008
Location: Texas
Age: 27
Posts: 5,246

User is: SoloSDN is offline
Re: Drag blocks!

Quote:
Originally Posted by mikeh918 View Post
It's all good, I was just hoping for an inexpensive way to drag until I can afford the notch and 4link set up

A+++ response..will read again...

project: FULL frame 4door
SoloSDN is offline  
post #27 of 31 Old 05-10-2012, 11:20 PM
Registered User
 
Join Date: Mar 2012
Location: Oklahoma City
Age: 29
Posts: 71

User is: joeyhambags is offline
Re: Drag blocks!

Quote:
Originally Posted by Custom Connection View Post
Ti blocks dont last very long and are more $$ so we dont build them. I have had a few guys ask for them lately so I'm thinking about doing them in the future. If you can round up a few buddys and get at least 3-4 others on board I will go ahead and get some ti and start on them. As for the 15th...That would be pushing it
where do I sign up? how much? and how fast can I have ti blocks? maybe even a ti rear drag plate? that would be AMAZING!
joeyhambags is offline  
post #28 of 31 Old 05-11-2012, 07:27 AM
Finally Bagged!!!
 
blazinjake's Avatar
 
Join Date: Jan 2007
Location: Ashburn, Georgia
Age: 30
Posts: 2,270

User is: blazinjake is offline
Re: Drag blocks!

I know i'm a bit late but it still needs saying...

I Love the whole magnesium thing... I know some people get it mixed up with titanium(or just don't know) but i always get the mental image of someone draggin magnesium in the rain... rofl!

Project Thread------------> http://www.s10forum.com/forum/f30/pr...-doors-438703/

Draggin' more ass than a dog with worms...
blazinjake is offline  
post #29 of 31 Old 05-11-2012, 12:13 PM
Pneumatic Fanatic
 
Join Date: Jun 2007
Posts: 489

User is: Custom Connection is offline
Re: Drag blocks!

Quote:
Originally Posted by joeyhambags View Post
where do I sign up? how much? and how fast can I have ti blocks? maybe even a ti rear drag plate? that would be AMAZING!
I would have to get some current pricing to figure what I could sell them for. As for where to sign up, just have some guys chime in and if there is enough interest Ill do it. If you want a bar tell be how long and I can quote it and it may use enough material to not need to do a group buy, I dont know we will have to see.
Custom Connection is offline  
post #30 of 31 Old 05-11-2012, 06:40 PM
Registered User
 
Patawick's Avatar
 
Join Date: Apr 2008
Location: Dora Alabama
Age: 26
Posts: 4,077

User is: Patawick is offline
Send a message via AIM to Patawick
Re: Drag blocks!

Check out waylayedinc.com. They sell some titanium blocks, pretty sick!

01 Xtreme - boss 327s shaved hood pissers, tailgate, tail lights, and doors. Two toned!
Patawick is offline  
post #31 of 31 Old 05-12-2012, 12:05 AM
Registered User
 
Join Date: Mar 2012
Location: Oklahoma City
Age: 29
Posts: 71

User is: joeyhambags is offline
Re: Drag blocks!

Quote:
Originally Posted by Custom Connection View Post
I would have to get some current pricing to figure what I could sell them for. As for where to sign up, just have some guys chime in and if there is enough interest Ill do it. If you want a bar tell be how long and I can quote it and it may use enough material to not need to do a group buy, I dont know we will have to see.
alright sounds like a deal I have a couple buddy's that are interested in ti blocks they just aren't members on this forum but as for a rear bar I'll hit you guys up with length I need and see if I can get a few friends to grab some blocks. thanks for the reply so quickly and I'll definantly be in contact
joeyhambags is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the S-10 Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address.


Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome