ATTN:Looking for new members

scorpion88_usa · 06-06-2007, 09:35 PM

Well if you say he can do a hell of a job I will look for him when I get back. I got the money just need freakin time. damn army lmao

voodoo427 · 06-06-2007, 10:59 PM

hooah

pewter_dime_99 · 06-07-2007, 02:20 AM

Quote: Originally Posted by scorpion88_usa

Well if you say he can do a hell of a job I will look for him when I get back. I got the money just need freakin time. damn army lmao

christian is top notch. the work he did on corey's truck was just as good (better in my opinoin) than any shop. BBT fab isn't too bad tho, i've seen some of their shit.
i'd recomend christian anyday tho, quality and good service.

SpYnOnU · 06-07-2007, 05:09 AM

here is the how-to thread he did on coreys truck, lots of pics gotta scim through some of it, not half bad though

http://www.s10forum.com/forum/f125/p...e-15-a-258241/

pewter_dime_99 · 06-07-2007, 05:11 AM

that thread dosn't do cores truck justice. i've seen it in person and i've hung out with christian. the work is immaculate.

scorpion88_usa · 06-07-2007, 03:17 PM

Hey you all pic of my truck in the avatar it is a crapy pic but the only one I can find right now

evolution1971 · 06-07-2007, 06:02 PM

When you get back you are more than welcome to join in one of our meetings. There are a couple of us vets in the group, so we appreciate what you are doing. As well as everyone else. Take care over there and we will see you soon.

Later,
Shawn

scorpion88_usa · 06-07-2007, 07:29 PM

I hope some of you guys are drinkers I still have been able to celebrate my 21st bday and turn 22 out here too damnit it sucks lmao

LowNoma22 · 06-08-2007, 01:18 AM

yeah man Christian does immaculate work..
he did all of my fabrication on the side from his full time job in about a month..
and for the price i paid it was definately worth it man..

pewter_dime_99 · 06-08-2007, 02:00 AM

Quote: Originally Posted by scorpion88_usa

I hope some of you guys are drinkers I still have been able to celebrate my 21st bday and turn 22 out here too damnit it sucks lmao

we'll have a big party when you get back bro!!! even tho i'm 19 and am not old enough to drink

scorpion88_usa · 06-08-2007, 02:20 PM

hey corey how much did you pay for set up

LowNoma22 · 06-09-2007, 08:02 PM

my setup parts wise?
$6500

scorpion88_usa · 06-09-2007, 09:47 PM

do you know if he could do a 4link cantilever set up?

LowNoma22 · 06-10-2007, 12:09 AM

he can do anything. lol

commradbret6998 · 08-11-2007, 11:49 AM

hey i live in decatur and i think i saw some one from ur club in cero gordo and was wonderin wat it was abt but i have a GMC sonoma its not the best but i wouldnt mind seein wat this club is abt

evolution1971 · 08-11-2007, 02:30 PM

Quote: Originally Posted by commradbret6998

hey i live in decatur and i think i saw some one from ur club in cero gordo and was wonderin wat it was abt but i have a GMC sonoma its not the best but i wouldnt mind seein wat this club is abt

That would be the club president you saw. He goes by JRod on here. We are having a meeting in September. Don't have a definite date or time yet, but if you are interested then stay posted on here. Should know in a couple of days. And don't worry about the look or shape. Mosy of us have daily drivers, and not completely show worthy. We are enthusiasts more than anything.
Stay posted with us on here and feel free to weigh in on anything, on our forum section if you want.

Later,
Shawn

jtcfanof3 · 08-11-2007, 06:42 PM

Hey comrad,welcome too the forum!!!
Ya were pretty laid back around here!!!
Heres a couple group shots:

J_Rod · 08-11-2007, 07:26 PM

Quote: Originally Posted by commradbret6998

hey i live in decatur and i think i saw some one from ur club in cero gordo and was wonderin wat it was abt but i have a GMC sonoma its not the best but i wouldnt mind seein wat this club is abt

Who, What, Where? Yeah, that would be me in CG. How did you come about around there?

commradbret6998 · 08-11-2007, 09:51 PM

Quote: Originally Posted by J_Rod

Who, What, Where? Yeah, that would be me in CG. How did you come about around there?

i go there every once an a while to help my friend chase with his go kart racing hes got a pretty nice car too but i don't think he wants to be in any clubs.

commradbret6998 · 08-11-2007, 10:06 PM

yea i have a question the guy that owned the truck was completly retarted or sumthin and im not shure if im supposed to have little clip or sumthing on my bumper bc its saging on the right side and the guy had a screw holding it in my quarter panel (kinda looks bad up close but i was just wonderin if i was missing a clip or sumthing

jtcfanof3 · 08-11-2007, 10:54 PM

What year of Noma is it?
There is two posts on the fenders that hold up the outside edges of the bumper cover too the fenders,you may have a broken portion of the bumper cover.
Take a pic,lets see what we got going on.

commradbret6998 · 08-11-2007, 11:09 PM

Quote: Originally Posted by jtcfanof3

What year of Noma is it?
There is two posts on the fenders that hold up the outside edges of the bumper cover too the fenders,you may have a broken portion of the bumper cover.
Take a pic,lets see what we got going on.

its a 1995 but ill prolly just wait to get a new bumper bc mine is all scared up so ill prolly just get a new bumper and try to bondo the holes that the person left from the screws i guess its a good that my friends dad is in autobody business ill prolly have him pant the bumper for cheap but ill need to put more money in the right side of the car if u want to look at the damage i got some pics on the other thread abt wrecked trucks

commradbret6998 · 08-11-2007, 11:59 PM

heres some pics of the bumper from the under and top side

commradbret6998 · 08-15-2007, 06:40 PM

hey do u guys mind if my friend chase tags along and brings his BMW 328is along?

jtcfanof3 · 08-15-2007, 07:13 PM

Dont bother me any,remember were not an S-10 only club.

commradbret6998 · 08-15-2007, 07:47 PM

alright

voodoo427 · 08-15-2007, 11:00 PM

aww man a beamer

j/k

J_Rod · 08-20-2007, 12:35 AM

Quote: Originally Posted by voodoo427

aww man a beamer

j/k

Actually...its bimmer in the BMW circles

SpYnOnU · 11-16-2007, 04:05 AM

well... taken up on what sean said at the meeting I have asked a few people and I think I have a couple interested up here, one has a blazer the other has an s10. the blazer guy is dropping 5/5 and the s10 guy is goin 5/6 so we shall see if there is a meeting in december if we will all go down. thats providing I get the miss-fire outta my truck its getting worse

evolution1971 · 11-16-2007, 08:20 AM

Quote: Originally Posted by SpYnOnU

well... taken up on what sean said at the meeting I have asked a few people and I think I have a couple interested up here, one has a blazer the other has an s10. the blazer guy is dropping 5/5 and the s10 guy is goin 5/6 so we shall see if there is a meeting in december if we will all go down. thats providing I get the miss-fire outta my truck its getting worse

If you think you can get it started up there, then go for it. It will be your baby to run. Just remember what we said about the rules you need to follow and all.

Later,
Shawn

sdimeguy2007 · 03-09-2008, 03:39 AM

Can You Take Out Of State Members? Im Stationed In Louisiana With The Air Force

jtcfanof3 · 03-09-2008, 11:22 AM

Where ya from locally sdimeguy??
We always welcome all guys!

voodoo427 · 03-11-2008, 12:00 AM

hey bret are you the guy that chase brought out to the rc shack?

06-06-2007, 09:35 PM	#51
scorpion88_usa layin low Age: 23 Join Date: Apr 2007 Posts: 6 Location: Mattoon User is: OffLine	Re: ATTN:Looking for new members Well if you say he can do a hell of a job I will look for him when I get back. I got the money just need freakin time. damn army lmao
	[Reply w/Quote]

06-06-2007, 10:59 PM	#52
voodoo427 Registered User Join Date: Jun 2006 Posts: 161 Location: champaign,il User is: OffLine	Re: ATTN:Looking for new members hooah
	[Reply w/Quote]

06-07-2007, 02:20 AM	#53
pewter_dime_99 finally bagged!! Age: 20 Join Date: May 2005 Posts: 384 Location: Mattoon. Il User is: OffLine	Re: ATTN:Looking for new members Quote: Originally Posted by scorpion88_usa Well if you say he can do a hell of a job I will look for him when I get back. I got the money just need freakin time. damn army lmao christian is top notch. the work he did on corey's truck was just as good (better in my opinoin) than any shop. BBT fab isn't too bad tho, i've seen some of their shit. i'd recomend christian anyday tho, quality and good service.
	[Reply w/Quote]

06-07-2007, 05:09 AM	#54
SpYnOnU AVTekk is my HERO Age: 22 Join Date: Mar 2006 Posts: 1,177 Location: illinois User is: OffLine	Re: ATTN:Looking for new members here is the how-to thread he did on coreys truck, lots of pics gotta scim through some of it, not half bad though http://www.s10forum.com/forum/f125/p...e-15-a-258241/
	[Reply w/Quote]

06-07-2007, 05:11 AM	#55
pewter_dime_99 finally bagged!! Age: 20 Join Date: May 2005 Posts: 384 Location: Mattoon. Il User is: OffLine	Re: ATTN:Looking for new members that thread dosn't do cores truck justice. i've seen it in person and i've hung out with christian. the work is immaculate.
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

06-07-2007, 03:17 PM	#56
scorpion88_usa layin low Age: 23 Join Date: Apr 2007 Posts: 6 Location: Mattoon User is: OffLine	Re: ATTN:Looking for new members Hey you all pic of my truck in the avatar it is a crapy pic but the only one I can find right now
	[Reply w/Quote]

06-07-2007, 06:02 PM	#57
evolution1971 Trick Motorsports! Age: 37 Join Date: May 2004 Posts: 216 Location: Tuscola,Illinois User is: OffLine	Re: ATTN:Looking for new members When you get back you are more than welcome to join in one of our meetings. There are a couple of us vets in the group, so we appreciate what you are doing. As well as everyone else. Take care over there and we will see you soon. Later, Shawn
	[Reply w/Quote]

06-07-2007, 07:29 PM	#58
scorpion88_usa layin low Age: 23 Join Date: Apr 2007 Posts: 6 Location: Mattoon User is: OffLine	Re: ATTN:Looking for new members I hope some of you guys are drinkers I still have been able to celebrate my 21st bday and turn 22 out here too damnit it sucks lmao
	[Reply w/Quote]

06-08-2007, 01:18 AM	#59
LowNoma22 Registered User Age: 17 Join Date: May 2005 Posts: 2,336 Location: Highland, Illinois User is: OffLine	Re: ATTN:Looking for new members yeah man Christian does immaculate work.. he did all of my fabrication on the side from his full time job in about a month.. and for the price i paid it was definately worth it man..
	[Reply w/Quote]

06-08-2007, 02:00 AM	#60
pewter_dime_99 finally bagged!! Age: 20 Join Date: May 2005 Posts: 384 Location: Mattoon. Il User is: OffLine	Re: ATTN:Looking for new members Quote: Originally Posted by scorpion88_usa I hope some of you guys are drinkers I still have been able to celebrate my 21st bday and turn 22 out here too damnit it sucks lmao we'll have a big party when you get back bro!!! even tho i'm 19 and am not old enough to drink Last edited by pewter_dime_99 : 06-08-2007 at 02:05 AM.
	[Reply w/Quote]

06-08-2007, 02:20 PM	#61
scorpion88_usa layin low Age: 23 Join Date: Apr 2007 Posts: 6 Location: Mattoon User is: OffLine	Re: ATTN:Looking for new members hey corey how much did you pay for set up
	[Reply w/Quote]

06-09-2007, 08:02 PM	#62
LowNoma22 Registered User Age: 17 Join Date: May 2005 Posts: 2,336 Location: Highland, Illinois User is: OffLine	Re: ATTN:Looking for new members my setup parts wise? $6500
	[Reply w/Quote]

06-09-2007, 09:47 PM	#63
scorpion88_usa layin low Age: 23 Join Date: Apr 2007 Posts: 6 Location: Mattoon User is: OffLine	Re: ATTN:Looking for new members do you know if he could do a 4link cantilever set up?
	[Reply w/Quote]

06-10-2007, 12:09 AM	#64
LowNoma22 Registered User Age: 17 Join Date: May 2005 Posts: 2,336 Location: Highland, Illinois User is: OffLine	Re: ATTN:Looking for new members he can do anything. lol
	[Reply w/Quote]

08-11-2007, 11:49 AM	#65
commradbret6998 slowsonoma Age: 17 Join Date: Aug 2007 Posts: 20 Location: Decatur,IL User is: OffLine	Re: ATTN:Looking for new members hey i live in decatur and i think i saw some one from ur club in cero gordo and was wonderin wat it was abt but i have a GMC sonoma its not the best but i wouldnt mind seein wat this club is abt
	[Reply w/Quote]

08-11-2007, 02:30 PM	#66
evolution1971 Trick Motorsports! Age: 37 Join Date: May 2004 Posts: 216 Location: Tuscola,Illinois User is: OffLine	Re: ATTN:Looking for new members Quote: Originally Posted by commradbret6998 hey i live in decatur and i think i saw some one from ur club in cero gordo and was wonderin wat it was abt but i have a GMC sonoma its not the best but i wouldnt mind seein wat this club is abt That would be the club president you saw. He goes by JRod on here. We are having a meeting in September. Don't have a definite date or time yet, but if you are interested then stay posted on here. Should know in a couple of days. And don't worry about the look or shape. Mosy of us have daily drivers, and not completely show worthy. We are enthusiasts more than anything. Stay posted with us on here and feel free to weigh in on anything, on our forum section if you want. Later, Shawn
	[Reply w/Quote]

08-11-2007, 06:42 PM	#67
jtcfanof3 Fan of the S-10 Age: 32 Join Date: Aug 2005 Posts: 2,610 Location: Sullivan Illinois User is: OffLine	Re: ATTN:Looking for new members Hey comrad,welcome too the forum!!! Ya were pretty laid back around here!!! Heres a couple group shots:
	[Reply w/Quote]

08-11-2007, 07:26 PM	#68
J_Rod Trick MotorSports! Age: 30 Join Date: Jul 2001 Posts: 1,211 Location: Decatur. IL User is: OffLine	Re: ATTN:Looking for new members Quote: Originally Posted by commradbret6998 hey i live in decatur and i think i saw some one from ur club in cero gordo and was wonderin wat it was abt but i have a GMC sonoma its not the best but i wouldnt mind seein wat this club is abt Who, What, Where? Yeah, that would be me in CG. How did you come about around there?
	[Reply w/Quote]

08-11-2007, 09:51 PM	#69
commradbret6998 slowsonoma Age: 17 Join Date: Aug 2007 Posts: 20 Location: Decatur,IL User is: OffLine	Re: ATTN:Looking for new members Quote: Originally Posted by J_Rod Who, What, Where? Yeah, that would be me in CG. How did you come about around there? i go there every once an a while to help my friend chase with his go kart racing hes got a pretty nice car too but i don't think he wants to be in any clubs.
	[Reply w/Quote]

08-11-2007, 10:06 PM	#70
commradbret6998 slowsonoma Age: 17 Join Date: Aug 2007 Posts: 20 Location: Decatur,IL User is: OffLine	Re: ATTN:Looking for new members yea i have a question the guy that owned the truck was completly retarted or sumthin and im not shure if im supposed to have little clip or sumthing on my bumper bc its saging on the right side and the guy had a screw holding it in my quarter panel (kinda looks bad up close but i was just wonderin if i was missing a clip or sumthing
	[Reply w/Quote]

08-11-2007, 10:54 PM	#71
jtcfanof3 Fan of the S-10 Age: 32 Join Date: Aug 2005 Posts: 2,610 Location: Sullivan Illinois User is: OffLine	Re: ATTN:Looking for new members What year of Noma is it? There is two posts on the fenders that hold up the outside edges of the bumper cover too the fenders,you may have a broken portion of the bumper cover. Take a pic,lets see what we got going on.
	[Reply w/Quote]

08-11-2007, 11:09 PM	#72
commradbret6998 slowsonoma Age: 17 Join Date: Aug 2007 Posts: 20 Location: Decatur,IL User is: OffLine	Re: ATTN:Looking for new members Quote: Originally Posted by jtcfanof3 What year of Noma is it? There is two posts on the fenders that hold up the outside edges of the bumper cover too the fenders,you may have a broken portion of the bumper cover. Take a pic,lets see what we got going on. its a 1995 but ill prolly just wait to get a new bumper bc mine is all scared up so ill prolly just get a new bumper and try to bondo the holes that the person left from the screws i guess its a good that my friends dad is in autobody business ill prolly have him pant the bumper for cheap but ill need to put more money in the right side of the car if u want to look at the damage i got some pics on the other thread abt wrecked trucks
	[Reply w/Quote]

08-15-2007, 06:40 PM	#74
commradbret6998 slowsonoma Age: 17 Join Date: Aug 2007 Posts: 20 Location: Decatur,IL User is: OffLine	Re: ATTN:Looking for new members hey do u guys mind if my friend chase tags along and brings his BMW 328is along?
	[Reply w/Quote]

08-15-2007, 07:13 PM	#75
jtcfanof3 Fan of the S-10 Age: 32 Join Date: Aug 2005 Posts: 2,610 Location: Sullivan Illinois User is: OffLine	Re: ATTN:Looking for new members Dont bother me any,remember were not an S-10 only club.
	[Reply w/Quote]

08-15-2007, 07:47 PM	#76
commradbret6998 slowsonoma Age: 17 Join Date: Aug 2007 Posts: 20 Location: Decatur,IL User is: OffLine	Re: ATTN:Looking for new members alright
	[Reply w/Quote]

08-15-2007, 11:00 PM	#77
voodoo427 Registered User Join Date: Jun 2006 Posts: 161 Location: champaign,il User is: OffLine	Re: ATTN:Looking for new members aww man a beamer j/k
	[Reply w/Quote]

08-20-2007, 12:35 AM	#78
J_Rod Trick MotorSports! Age: 30 Join Date: Jul 2001 Posts: 1,211 Location: Decatur. IL User is: OffLine	Re: ATTN:Looking for new members Quote: Originally Posted by voodoo427 aww man a beamer j/k Actually...its bimmer in the BMW circles
	[Reply w/Quote]

11-16-2007, 04:05 AM	#79
SpYnOnU AVTekk is my HERO Age: 22 Join Date: Mar 2006 Posts: 1,177 Location: illinois User is: OffLine	Re: ATTN:Looking for new members well... taken up on what sean said at the meeting I have asked a few people and I think I have a couple interested up here, one has a blazer the other has an s10. the blazer guy is dropping 5/5 and the s10 guy is goin 5/6 so we shall see if there is a meeting in december if we will all go down. thats providing I get the miss-fire outta my truck its getting worse
	[Reply w/Quote]

11-16-2007, 08:20 AM	#80
evolution1971 Trick Motorsports! Age: 37 Join Date: May 2004 Posts: 216 Location: Tuscola,Illinois User is: OffLine	Re: ATTN:Looking for new members Quote: Originally Posted by SpYnOnU well... taken up on what sean said at the meeting I have asked a few people and I think I have a couple interested up here, one has a blazer the other has an s10. the blazer guy is dropping 5/5 and the s10 guy is goin 5/6 so we shall see if there is a meeting in december if we will all go down. thats providing I get the miss-fire outta my truck its getting worse If you think you can get it started up there, then go for it. It will be your baby to run. Just remember what we said about the rules you need to follow and all. Later, Shawn
	[Reply w/Quote]

03-09-2008, 03:39 AM	#81
sdimeguy2007 Anti-Bag Coalition Age: 22 Join Date: Dec 2007 Posts: 287 Location: Bossier City, Louisiana User is: OffLine	Re: ATTN:Looking for new members Can You Take Out Of State Members? Im Stationed In Louisiana With The Air Force
	[Reply w/Quote]

03-09-2008, 11:22 AM	#82
jtcfanof3 Fan of the S-10 Age: 32 Join Date: Aug 2005 Posts: 2,610 Location: Sullivan Illinois User is: OffLine	Re: ATTN:Looking for new members Where ya from locally sdimeguy?? We always welcome all guys!
	[Reply w/Quote]

03-11-2008, 12:00 AM	#83
voodoo427 Registered User Join Date: Jun 2006 Posts: 161 Location: champaign,il User is: OffLine	Re: ATTN:Looking for new members hey bret are you the guy that chase brought out to the rc shack?
	[Reply w/Quote]