Canadian Rides (PICS)

[Blk N' Blu]

Quote: Originally Posted by 02_blue_dime

hey geoff, did you ever find a place for that rear plate? i know at the meets and when i met you a couple times you just had it hanging from the tonneau cover lol....

hes got a way cooler setup then that

[Innis]

Quote: Originally Posted by yellow belly

hey inns im here whats going on,do eney work to the truck.

what up man, no, no work done yet, its goin up to ash in april or so and im gonna try and get a week off of work to go out there but we are super busy so i might not see it till may

so any work on your truck, what was the deal with the 40 ford hood on a 1st gen hood??

oh and has mike told ya yet about his plans for this summer involving a vehicle with 2 wheels and not 4

[cormackracing]

Quote: Originally Posted by 02_S10_LS

nice sticker...... i just put the same one in the same spot...

[1LowSONO]

Quote: Originally Posted by 02_blue_dime

hey geoff, did you ever find a place for that rear plate? i know at the meets and when i met you a couple times you just had it hanging from the tonneau cover lol....

ya i put it on a locking slider, to make it a hidden plate. i just need to wire up some leds. (keepin it ghetto with the zip tie)

[Innis]

Quote: Originally Posted by cormackracing

nice sticker...... i just put the same one in the same spot...

haha so do i

woot jeff thanks for that

[Slowrider]

Quote: Originally Posted by Skittles88

Mine, my brother's and cousin's...

think i'v seen the yellow one in my area last year
they all look pretty bad ass

[BobOnAir]

Hey Canuks! Who's going to S-Series Nats this year?

It's in Missouri at Meremec Caverns, June 13, 14 & 15.

I'm going down, Mapquest says about 18 hours,, but more likely 14! or so!

So, anybody interested?

[yellow belly]

Quote: Originally Posted by Innis

what up man, no, no work done yet, its goin up to ash in april or so and im gonna try and get a week off of work to go out there but we are super busy so i might not see it till may

so any work on your truck, what was the deal with the 40 ford hood on a 1st gen hood??

oh and has mike told ya yet about his plans for this summer involving a vehicle with 2 wheels and not 4

not yet in the spring i hope .the hood i thought it would be diffrent just need to finesh it.i hered something about 2wheels

[bza]

Quote: Originally Posted by BobOnAir

Hey Canuks! Who's going to S-Series Nats this year?

It's in Missouri at Meremec Caverns, June 13, 14 & 15.

I'm going down, Mapquest says about 18 hours,, but more likely 14! or so!

So, anybody interested?

theres so many good shows in the states, i wish i could go to them all, but unfortunately i doubt ill be able to go to all of them i want. s series nats looks good, but to be honest i really wanna go to indy. i think we should all try to cruise down there!

[1LowSONO]

Quote: Originally Posted by BobOnAir

Hey Canuks! Who's going to S-Series Nats this year?

It's in Missouri at Meremec Caverns, June 13, 14 & 15.

I'm going down, Mapquest says about 18 hours,, but more likely 14! or so!

So, anybody interested?

same days as vanfest.

[02_blue_dime]

right on geoff that looks wicked!!! ....well my shocker sticker is only on for another week....i gotta get a new windsheild mine is TOTALLY ****ed (just waiting for the 1st pay cheque from work)...god dam alberta haha...

[Innis]

Quote: Originally Posted by yellow belly

not yet in the spring i hope .the hood i thought it would be diffrent just need to finesh it.i hered something about 2wheels

nice nice i cant wait to see that hood finished it will be amazing

oh and ya watch out for the 2 wheels, it cooler haha, no i think he is in a mid life crisis, i mean hes old hahah

[Blk N' Blu]

Quote: Originally Posted by 02_blue_dime

right on geoff that looks wicked!!! ....well my shocker sticker is only on for another week....i gotta get a new windsheild mine is TOTALLY ****ed (just waiting for the 1st pay cheque from work)...god dam alberta haha...

dont worrie every ricer around woodstock seems to have one on... i got passed by a ghetto ass'd civic on the way to windsor this weekend and it had one... made me sad

[Blk N' Blu]

hmmmm double post... quite odd... maby i Wont drink this glass of...pop........

[02_blue_dime]

out here we call em wobbley pops!

[Blk N' Blu]

Quote: Originally Posted by 02_blue_dime

out here we call em wobbley pops!

u damn western folk...

[02_blue_dime]

don't be hatin!

[Blk N' Blu]

Quote: Originally Posted by 02_blue_dime

don't be hatin!

u know its no hate! still keepin it all in the north! good ol crazy canadians

[corpse]

my truck

under contruction in my garage

[02_blue_dime]

holy lol did GM just made pewter trucks? haha thats all i see now a days...looks hot bro lovin the laid out look on zq8's can't wait till i finish mine this summer

[bza]

Quote: Originally Posted by corpse

my truck

under contruction in my garage

looks good man. i saw in your other post your in etibicoke near islington and eglinton. im around north york just off the 401 and yonge. definately should come to some meets and go for some cruises.

[slvrs10]

Crap, now I wanna bag mine again. Another twin of mine, making me jealous.

[corpse]

im goin to tomorrows meet... im doin a shitload of mods but i dunno if ill be drivin this summer... got to go to school, pay off my debt(even sellin my stuntbike! ), and i got a house to maintain. so im pretty tapped outta cash right now...

if anything ill prolly be drivin without a bed... do cops care bout that?

???how many people on here do all their mods themselves vs payin someone???

[1LowSONO]

Quote: Originally Posted by corpse

if anything ill prolly be drivin without a bed... do cops care bout that?

yes they do. its an unsafe vehicle.

[bza]

Quote: Originally Posted by corpse

im goin to tomorrows meet... im doin a shitload of mods but i dunno if ill be drivin this summer... got to go to school, pay off my debt(even sellin my stuntbike! ), and i got a house to maintain. so im pretty tapped outta cash right now...

if anything ill prolly be drivin without a bed... do cops care bout that?

???how many people on here do all their mods themselves vs payin someone???

not driving it this summer eh?? work on that bitch and get her ready haha.
i hear ya man, money is easy to spend, and alot harder to come by, bills, daily living etc, sometimes the hobbies gotta come second.

[corpse]

Quote: Originally Posted by 1LowSONO

yes they do. its an unsafe vehicle.

unsafe how? what exactly is that pile of tin gonna stop??? if i put on my bumper and have brake lights

[1LowSONO]

Quote: Originally Posted by corpse

unsafe how? what exactly is that pile of tin gonna stop??? if i put on my bumper and have brake lights

i wanted to ride like that a while ago and opp told me that it was unsafe cuz the lights wouldnt be seen and the bumper would do sh!t if some rearended me. in the event of a collision, the car would just ride over the frame into the cab. i would just check the ontario HTA and see what it says.

[corpse]

guess it makes sense

[AfraidofHeights88]

[02_blue_dime]

wow i know i've seen that truck before.......i usted to leave near you bro when i was back in mississauga....i lived off trotwood, your just off lynd aren't you

[bza]

Quote: Originally Posted by AfraidofHeights88

damn thats clean bro. where in toronto you from?

[AfraidofHeights88]

I live in Mississauga, and u?

[bza]

toronto about 10 minute drive or less from yonge/401.
you gonna come out to some meets/cruises this spring/summer?

bike looks sick too
what kind>

[AfraidofHeights88]

Thinking of bagging it so I'll see if its ready. I noticed your truck is bagged also, got any advice?

[SleepyTow]

Quote: Originally Posted by bza

bike looks sick too
what kind>

Looks like an 03 r6

[1LowSONO]

Quote: Originally Posted by AfraidofHeights88

Thinking of bagging it so I'll see if its ready. I noticed your truck is bagged also, got any advice?

if ur gonna take it to a shop to get bagged, do your research and make sure they arent gonna hack up your ride, and get an alignment after

[AfraidofHeights88]

No, I have no plans of taking it to a shop. I don't like other people touching my truck so i'm thinking of doing it myself. I'm considering getting the sd 5link balk half and doing upper and lower control arms in the front with my existing drop spindles. I want to lay frame so I've been doing some research lately to see what I need to do for that. Got any pictures of your valve setup?

By the way the bike is a 03 r6 and its actually my buddies, we put it on the back of my truck to see how much the truck would drop with the 20's on.

[AfraidofHeights88]

Quote: Originally Posted by 02_blue_dime

wow i know i've seen that truck before.......i usted to leave near you bro when i was back in mississauga....i lived off trotwood, your just off lynd aren't you

Ya thats me.... small world. What made u move out to alberta?

[02_blue_dime]

to be honest i got sick of living in ont...things just weren't falling into place, that whole cawthra area is starting to be bad news just pretty much sick of all the drama in that area and wanted to get away...you've prob seen my truck around....this is her



after moving out here it really changes you, now that i'm living in a small community in medicine hat all the people are friendly and it's awesome

oh and haha if you ever drive out here it's a long freggin drive my god

[bza]

Quote: Originally Posted by AfraidofHeights88

No, I have no plans of taking it to a shop. I don't like other people touching my truck so i'm thinking of doing it myself. I'm considering getting the sd 5link balk half and doing upper and lower control arms in the front with my existing drop spindles. I want to lay frame so I've been doing some research lately to see what I need to do for that. Got any pictures of your valve setup?

By the way the bike is a 03 r6 and its actually my buddies, we put it on the back of my truck to see how much the truck would drop with the 20's on.

i was gonna suggest making sure you do adequate research before getting it done at a shop as well like geoff said, but since you wanna do it yourself if you have questions id check out the "baggin it" section, or look in the member projects, im sure youll be able to find out everything you need to know there, and if you have any pictures requests or questions people will definitely be able to help ya out. theres alot of helpful people on here so may as well take advantage. if you got the space, the knowledge and the equipment, the cost will definitely be lower and you can have the satisfaction of seeing the finished product you have worked on.

[AfraidofHeights88]

Quote: Originally Posted by 02_blue_dime

to be honest i got sick of living in ont...things just weren't falling into place, that whole cawthra area is starting to be bad news just pretty much sick of all the drama in that area and wanted to get away...you've prob seen my truck around....this is her



after moving out here it really changes you, now that i'm living in a small community in medicine hat all the people are friendly and it's awesome

oh and haha if you ever drive out here it's a long freggin drive my god

Well glad to see everythings working out for u. My buddy tried moving out there but only lasted 4 months.

[AfraidofHeights88]

Quote: Originally Posted by bza

i was gonna suggest making sure you do adequate research before getting it done at a shop as well like geoff said, but since you wanna do it yourself if you have questions id check out the "baggin it" section, or look in the member projects, im sure youll be able to find out everything you need to know there, and if you have any pictures requests or questions people will definitely be able to help ya out. theres alot of helpful people on here so may as well take advantage. if you got the space, the knowledge and the equipment, the cost will definitely be lower and you can have the satisfaction of seeing the finished product you have worked on.

Ya, thats pretty much what I've been doing. Is your truck not bagged?

[bza]

Quote: Originally Posted by AfraidofHeights88

Ya, thats pretty much what I've been doing. Is your truck not bagged?

no mine is bagged, a bit of the info is in my signature. are you planning on getting things started this spring/summer?

[s10_chevy17]

holy shit man
i met you last year at the jbody show, i got ur alberta cell, remember me?
mike from hamilton, 86 s10 bagged

man hows medicine hat? smallll world, thats where i have family
do you know any of the ppl from there?
Denesiuk ring a bell?

Quote: Originally Posted by 02_blue_dime

to be honest i got sick of living in ont...things just weren't falling into place, that whole cawthra area is starting to be bad news just pretty much sick of all the drama in that area and wanted to get away...you've prob seen my truck around....this is her



after moving out here it really changes you, now that i'm living in a small community in medicine hat all the people are friendly and it's awesome

oh and haha if you ever drive out here it's a long freggin drive my god

[02_blue_dime]

hey mike yes i do remember you holy shit eh small world dude! i'm working for canadian pacific railway...just stuck in calgary untill feb 8th doing training gah i wanna go back to the hat is so small and WAY easier to get around haha..can't say i've ever heard of that place you mentioned tho..

[Basic]

howd i miss this thread? haha..

[sonomaguy]

Quote: Originally Posted by AfraidofHeights88

Sweet ride. Guess you have to be careful havin that pool so close to the garage.

[unperfected]

well im sure everyone has seen mine but for the peeps that havnt

[Slowrider]

Quote: Originally Posted by AfraidofHeights88

sweet truck, hopefull see you around next year, assuming my trucks out!
i'm just over in etobicoke
and as far as bagging...might wanna look into cando cantilever 6 link
no one seems to like the SD wishbone set-up
oh and AAC in the East end is hooking me up with the my parts, talk to Kev his a cool guy to deal with

[Innis]

Quote: Originally Posted by Slowrider

sweet truck, hopefull see you around next year, assuming my trucks out!
i'm just over in etobicoke
and as far as bagging...might wanna look into cando cantilever 6 link
no one seems to like the SD wishbone set-up
oh and AAC in the East end is hooking me up with the my parts, talk to Kev his a cool guy to deal with

whatttttttttttt who said that, i know tons of ppl with the wishbone setup, the only part ppl dont like is some have to shorten driveshafts

ive never heard that before