tpi - S-10 Forum

groundforce1 · 10-29-2009, 02:10 PM

i know a guy who is selling tune port with brand new wiring harness and computer for 750. ive personally seen it and its in good condition. a steal?

SH-60B · 10-29-2009, 05:10 PM

Not if it's a 305

Maverick2664 · 10-29-2009, 05:21 PM

Quote: Originally Posted by SH-60B

Not if it's a 305

doesnt matter... the 305 and the 350 TPI are identical, the only thing that was different was was injector size, 305 was 18lbs/hr 350 was 21lbs/hr, other than that there is absolutely no difference between the 2

to the OP: i wouldnt call it a steal, but its not a bad price... but its not really a good one either... ive seen complete sets on ebay (harness and ecm included) that were polished for 1000

you can piece one together youself for about the same price or cheaper, i got lower manifold, plenum, runners, fuel rails, and throttle body for less than 200, and im doing some trading for my ecm and im building my own harness

SH-60B · 10-29-2009, 07:45 PM

Quote: Originally Posted by Maverick2664

doesnt matter... the 305 and the 350 TPI are identical, the only thing that was different was was injector size, 305 was 18lbs/hr 350 was 21lbs/hr, other than that there is absolutely no difference between the 2

to the OP: i wouldnt call it a steal, but its not a bad price... but its not really a good one either... ive seen complete sets on ebay (harness and ecm included) that were polished for 1000

you can piece one together youself for about the same price or cheaper, i got lower manifold, plenum, runners, fuel rails, and throttle body for less than 200, and im doing some trading for my ecm and im building my own harness

I'm aware of that. I assumed he meant the entire engine for that price. I've seen just the intake and supporting parts for far less than $750.

sosolos10 · 10-29-2009, 09:10 PM

i got mine off ebay to, all 4 peices of the intake, the throttle body,all the hardware, all the sensors off the motor, the hole wiring harness from the vette it come from, the ECM, and a brand new painless wiring kit. i only gave $350 for it all

Maverick2664 · 10-29-2009, 10:12 PM

Quote: Originally Posted by sosolos10

i got mine off ebay to, all 4 peices of the intake, the throttle body,all the hardware, all the sensors off the motor, the hole wiring harness from the vette it come from, the ECM, and a brand new painless wiring kit. i only gave $350 for it all

thats a screaming deal, i wish i got that lucky

SH-60B · 10-29-2009, 10:31 PM

Quote: Originally Posted by sosolos10

i got mine off ebay to, all 4 peices of the intake, the throttle body,all the hardware, all the sensors off the motor, the hole wiring harness from the vette it come from, the ECM, and a brand new painless wiring kit. i only gave $350 for it all

Yes, that's a very good deal with the Painless wiring.

sosolos10 · 10-29-2009, 10:42 PM

yeah and the ECM has a hyper chip in it and that painless kit was new still in the box never opened

groundforce1 · 10-29-2009, 11:31 PM

well true u can find a tune port on ebay and a wiring harness for cheaper than this.IM not shure what company the harness is from but it hasnt been used and all plugs are labeled. looked good. i snapped a few pics of the tune port. real good shape. real clean. and like i said also the computer. there r one or two very small dings in the tubes. the one dude at the shop said something bout a deal u can run through it to pop them out. any info on this?

groundforce1 · 10-29-2009, 11:37 PM

i thought i took more pics but this is all i got.

Maverick2664 · 10-30-2009, 01:15 PM

the "deal" youre talking about is this: http://cgi.ebay.com/ebaymotors/TUNED...fAcce ssories

im probably going to get this myself, i have a few dents in my runners that the freezing method didnt fix

or you could take them to a music shop that repairs instruments, they get crazy ass dents out all the time and they have to be perfect or it wont sound right, so theyre more than qualified to fix a tpi runner

sosolos10 · 11-01-2009, 12:38 PM

Yeah a friend of mine that deals with a lot of Irocs told me that, that what he does

groundforce1 · 11-01-2009, 09:55 PM

hey i appreciate it. Im goin to get the intake tomarrow. Ill try to post some better pics of it.

10-29-2009, 02:10 PM	#1
groundforce1 Registered User Join Date: Jan 2007 Posts: 158 Location: User is: OffLine	tpi i know a guy who is selling tune port with brand new wiring harness and computer for 750. ive personally seen it and its in good condition. a steal?
	[Reply w/Quote]

10-29-2009, 05:10 PM	#2
SH-60B Registered Neanderthal Join Date: Nov 2007 Posts: 2,740 Location: Meriden/CT/USA User is: OffLine	Re: tpi Not if it's a 305
	[Reply w/Quote]

10-29-2009, 05:21 PM	#3
Maverick2664 Heavy Metal Body Man Age: 25 Join Date: Jun 2007 Posts: 3,131 Location: Erie PA User is: OffLine	Re: tpi Quote: Originally Posted by SH-60B Not if it's a 305 doesnt matter... the 305 and the 350 TPI are identical, the only thing that was different was was injector size, 305 was 18lbs/hr 350 was 21lbs/hr, other than that there is absolutely no difference between the 2 to the OP: i wouldnt call it a steal, but its not a bad price... but its not really a good one either... ive seen complete sets on ebay (harness and ecm included) that were polished for 1000 you can piece one together youself for about the same price or cheaper, i got lower manifold, plenum, runners, fuel rails, and throttle body for less than 200, and im doing some trading for my ecm and im building my own harness
	[Reply w/Quote]

10-29-2009, 07:45 PM	#4
SH-60B Registered Neanderthal Join Date: Nov 2007 Posts: 2,740 Location: Meriden/CT/USA User is: OffLine	Re: tpi Quote: Originally Posted by Maverick2664 doesnt matter... the 305 and the 350 TPI are identical, the only thing that was different was was injector size, 305 was 18lbs/hr 350 was 21lbs/hr, other than that there is absolutely no difference between the 2 to the OP: i wouldnt call it a steal, but its not a bad price... but its not really a good one either... ive seen complete sets on ebay (harness and ecm included) that were polished for 1000 you can piece one together youself for about the same price or cheaper, i got lower manifold, plenum, runners, fuel rails, and throttle body for less than 200, and im doing some trading for my ecm and im building my own harness I'm aware of that. I assumed he meant the entire engine for that price. I've seen just the intake and supporting parts for far less than $750.
	[Reply w/Quote]

10-29-2009, 09:10 PM	#5
sosolos10 Registered User Age: 26 Join Date: Feb 2008 Posts: 412 Location: Romney WV User is: OffLine	Re: tpi i got mine off ebay to, all 4 peices of the intake, the throttle body,all the hardware, all the sensors off the motor, the hole wiring harness from the vette it come from, the ECM, and a brand new painless wiring kit. i only gave $350 for it all
	[Reply w/Quote]

10-29-2009, 10:12 PM	#6
Maverick2664 Heavy Metal Body Man Age: 25 Join Date: Jun 2007 Posts: 3,131 Location: Erie PA User is: OffLine	Re: tpi Quote: Originally Posted by sosolos10 i got mine off ebay to, all 4 peices of the intake, the throttle body,all the hardware, all the sensors off the motor, the hole wiring harness from the vette it come from, the ECM, and a brand new painless wiring kit. i only gave $350 for it all thats a screaming deal, i wish i got that lucky
	[Reply w/Quote]

10-29-2009, 10:31 PM	#7
SH-60B Registered Neanderthal Join Date: Nov 2007 Posts: 2,740 Location: Meriden/CT/USA User is: OffLine	Re: tpi Quote: Originally Posted by sosolos10 i got mine off ebay to, all 4 peices of the intake, the throttle body,all the hardware, all the sensors off the motor, the hole wiring harness from the vette it come from, the ECM, and a brand new painless wiring kit. i only gave $350 for it all Yes, that's a very good deal with the Painless wiring.
	[Reply w/Quote]

10-29-2009, 10:42 PM	#8
sosolos10 Registered User Age: 26 Join Date: Feb 2008 Posts: 412 Location: Romney WV User is: OffLine	Re: tpi yeah and the ECM has a hyper chip in it and that painless kit was new still in the box never opened
	[Reply w/Quote]

10-29-2009, 11:31 PM	#9
groundforce1 Registered User Join Date: Jan 2007 Posts: 158 Location: User is: OffLine	Re: tpi well true u can find a tune port on ebay and a wiring harness for cheaper than this.IM not shure what company the harness is from but it hasnt been used and all plugs are labeled. looked good. i snapped a few pics of the tune port. real good shape. real clean. and like i said also the computer. there r one or two very small dings in the tubes. the one dude at the shop said something bout a deal u can run through it to pop them out. any info on this?
	[Reply w/Quote]

10-30-2009, 01:15 PM	#11
Maverick2664 Heavy Metal Body Man Age: 25 Join Date: Jun 2007 Posts: 3,131 Location: Erie PA User is: OffLine	Re: tpi the "deal" youre talking about is this: http://cgi.ebay.com/ebaymotors/TUNED...fAcce ssories im probably going to get this myself, i have a few dents in my runners that the freezing method didnt fix or you could take them to a music shop that repairs instruments, they get crazy ass dents out all the time and they have to be perfect or it wont sound right, so theyre more than qualified to fix a tpi runner
	[Reply w/Quote]

11-01-2009, 12:38 PM	#12
sosolos10 Registered User Age: 26 Join Date: Feb 2008 Posts: 412 Location: Romney WV User is: OffLine	Re: tpi Yeah a friend of mine that deals with a lot of Irocs told me that, that what he does
	[Reply w/Quote]

11-01-2009, 09:55 PM	#13
groundforce1 Registered User Join Date: Jan 2007 Posts: 158 Location: User is: OffLine	Re: tpi hey i appreciate it. Im goin to get the intake tomarrow. Ill try to post some better pics of it.
	[Reply w/Quote]