S10Forum

Wtb 2wd 4.3 transmission 5 speed nv3500 manual

94s10cpi — Mon, 15 Aug 2011 04:49:49 -0400

by: 94s10cpi

Description: Wanting to buy a transmission for a 2wd 99 4.3l s10 5 speed. Mine went out. Preferably one with low miles. Thanks

99s15 transmission pan

36master — Sat, 13 Aug 2011 20:21:33 -0400

by: 36master

Description: Hello Guys, I am looking to buy a transmission pan for a 99 s15.i assum the s10 would be same.615-428-8243 or email

x cab split drive shafts

jasxtreme13 — Sun, 07 Aug 2011 10:49:22 -0400

by: jasxtreme13

Description: i have drive shafts out of my x cab parts truck. has 80,000 on it. contact me @ jasinger@cox.net

New powerglide

boyzipp87 — Fri, 05 Aug 2011 00:48:26 -0400

by: boyzipp87

Description: This is a new powerglide built by Transmission Specialties it has a shorty tail, pro line trans brake, its a 2 speed, and is rated up to 650 hp, it also comes with a brand new torque convertor from Transmission Specialties, it is a Big Shoot 10LSXHD 10inch stall 2900-3300rpm and a brand new pionner flexplate/flywheel to we bought all this stuff new a couple years ago for a project that never got finished and just trying to get some of are money back, 1,500 in new parts looking to get 800.00 OBO Seller Phone Number: 317-610-1684

2001 5 speed tranny out of 2wd blazer

lucky-13 — Fri, 22 Jul 2011 17:09:55 -0400

by: lucky-13

Description: im selling my tans out of a 2001 2wd blazer/jimmy nothing wrong, just had the fluid changed 300 miles ago with amsoil. im parting out my engine also, doing an lsx swap. im asking 500 obo i live in nw wisconsin

need a hurst or b&M FOR A NV3500 (4.3)

03 zee — Mon, 11 Jul 2011 23:46:56 -0400

by: 03 zee

Description: I KNOW THIS IS A LONGSHOT BUT DOES ANYONE HAVE A HURST OR B&M SHIFTER FOR A 03 WITH A 4.3 & A NV3500?

Rebuilt 700 R4

dpmalibu — Sun, 10 Jul 2011 21:44:11 -0400

by: dpmalibu

Description: I have a Jasper rebuilt 700 R4 trans w/ mild shift kit and TCI saturday night special converter. Runs and shifts good. New filter and fluid just changed 0 miles on that. $400 Trans is curremtly in a 1988 Pontiac Firebird Formula No pics of trans since it is still in car. Can test drive car prior to me pulling trans. Located in Hatboro,Pa

96-98 5speed 2.2 transmission

01TargaZ06 — Sat, 09 Jul 2011 22:49:42 -0400

by: 01TargaZ06

Description: Hi I got a 98 transmission I'm looking to sell, I bought it thinking it was for my 94 but when I got it home it was obviously the wrong tranny.. comes with shifter and clutch parts hooked to the main shaft, shaft spins freely and shifts good

s10 transmission crossmember

dimetime89 — Mon, 27 Jun 2011 22:12:20 -0400

by: dimetime89

Description: i have a 2nd gen s10 transmission crossmember for sale. its in fsir shape. asking 50 bucks

98-03 s10 4L60E transmission

dimetime89 — Mon, 27 Jun 2011 22:00:40 -0400

by: dimetime89

Description: I have a 4L60E transmission out of a 2000 s10 2.2 4 cylinder for sale. it has 115,000 miles on it and is still in good shape. ive never had a problem with it.

700r4 transmission case

dimetime89 — Mon, 27 Jun 2011 21:55:36 -0400

by: dimetime89

Description: i have an empty 700r4 transmission case with the pan. it would be good for a core or a transmission build up. im asking 75 bucks for it.

B AND M STAR SHIFTER

dimetime89 — Sun, 19 Jun 2011 16:34:54 -0400

by: dimetime89

Description: i have a b&m star shifter i am selling. its in good shape. its a floor mount and i had it in a s10. i have the cable and the console that goes with it. im asking 75 dollars for it. if interested get ahold of me on here.

Front Differential off a 2002 Chevy S10 2wd

Roly — Thu, 16 Jun 2011 19:48:49 -0400

by: Roly

Description: Front Diff off a 2002 Chevy S10 2wd. It has about 40,000 miles on it. Perfect condition.

Remco driveline, for towing

harrysnyder — Wed, 15 Jun 2011 07:28:23 -0400

by: harrysnyder

Description: This is a remco kit for a 82-92 chevrolet s10. it will work on anything with that style 10 bolt rear end though because that is what the bracket is for. this is made so that you can flat tow your s10 without having to worry about wear and tear on the drivetrain. google remco and you will see all about these kits. i'm asking 250 or best offer.

1998 4x4 4l60e

Kucharyski20 — Thu, 09 Jun 2011 01:44:34 -0400

by: Kucharyski20

Description: 1998 4x4 4l60e with torque converter, shifted smoothly when removed, 130k miles. Missing the electric shifter box on the side. it got cracked while removing the motor and trans as one one piece. 200 obo 219-242-5673 open for trades

gearbox

chambo — Sat, 28 May 2011 09:29:07 -0400

by: chambo

Description: 4L60E TRANSMISSION TAKEN OUT OF MY 1999 S-10 4X4 BLAZER THAT I AM BREAKING,IT'S GOT ABOUT 10,000 MILES ON IT AFTER BEING RECONDITIONED 2 YEARS AGO.

1995 S10 2.2 T5 transmission

95Bandit — Thu, 26 May 2011 17:58:22 -0400

by: 95Bandit

Description: 100k out of a 2.2 4 cylinder truck. Excellent condition, shifts great. I put it on Craigslist locally and for some reason a few people think this is the whole truck. So for any of you wondering, this is for the transmission only. I don't have the clutch, bellhousing, or shifter anymore. I'm located near Asheville NC. Email is the quickest way to get ahold of me. My email is importkiller76@aol.com Thanks for looking. Can email pics

93 S10 WC T5 Transmission

FirstGensForever — Thu, 26 May 2011 01:39:02 -0400

by: FirstGensForever

Description: 93 WC spec T5 trans. Has 55k miles came out of my 93 2.8 RCSB. swapping in a 350/T56 don't need this anymore. I bought it used from a salvage yard after my stock t5 broke due to lack of lubrication, was in my truck for about 5k miles ran smooth and quiet. Any questions feel free to ask, if your in dallas, austin, or Houston area im willing to meet to save on shipping.

B&M ShiftPlus Transmission Electronic Shift Improver

Jared5595 — Mon, 11 Apr 2011 18:21:27 -0400

by: Jared5595

Description: "B&M ShiftPlus Electronic Shift Improver for GM * Installs in minutes. * Reduces slippage and heat! * 50 state emissions legal. * For late model automatic transmission equipped vehicles. ShiftPlus simply recalibrates your transmission's hydraulic system electronically. The ShiftPlus shift firmness not only makes driving more fun and pleasurable, but slippage and heat are reduced - extending the life of your transmission! Anyone can install a B&M ShiftPlus in minutes with a few simple hand tools. This new design allows you to improve the transmission's shifting performance without removing the transmission pan or valve body. The B&M ShiftPlus electronically enhances shift quality and is adjustable. A simple flip of the switch allows the transmission to operate in the performance mode. Flip it back and you are back to stock!" This is a USED B&M Electronic Shift Improver for GM Transmissions. The item was previously used on 1997 GMC Jimmy with a 4L60E tranny. 3M Splice connectors are NOT included. Wire was shortened; excess wire was added back later. Ships with installation instructions, or you can find them here: http://www.bmracing.com/bmracing/installation_instruction/9500631-06.pdf Item will ship from Fayetteville, TN. Shipping is included in asking price.

Rebuilt NV3500

blazinlow97 — Sat, 02 Apr 2011 02:34:49 -0400

by: blazinlow97

Description: nv3500

Looking for a Foam Shifter Insulator

01BlazerSS — Fri, 01 Apr 2011 23:56:24 -0400

by: 01BlazerSS

Description: I am looking for the foam insulator that goes around the shifter between the floor and the trans. Preferably from a 4wd nv3500.

GM Drive shaft

LeMonsS10 — Thu, 31 Mar 2011 15:22:26 -0400

by: LeMonsS10

Description: GM drive shaft. Turbo 350 yoke. perfect condition. 61.5" long from u-joint center to u-joint center.

transfer case NPG-231-c

kfe — Tue, 29 Mar 2011 21:35:57 -0400

by: kfe

Description: i did a engine and standard trans. swap from a 02 blazer to my 96 this came with it. used the one i had caus its manaul. this is an eletronic. i am in utah would like to get it to someone that needs it. oh yea its got about 69000 mi. on it 100.00 obo

Inland Empire 4" Alumn. Driveshaft

Old Fart — Mon, 28 Mar 2011 14:18:16 -0400

by: Old Fart

Description: Inland Empire 1-piece 4" Aluminum driveshaft that replaces the stock 2-piece. This will fit the V-6 extended cab S-10. I installed this shaft on my truck and ran it for about 3 months. Because of the roads in my area, I did have some "bottoming out" problems with the driveshaft. My truck is a 2002 & is at stock height with 17" wheels. I will need to add UPS shipping to the selling price, which would be $25....for a total of $325.00.

1996 NV1500 Trans 55k

Krankenstein — Fri, 18 Mar 2011 00:46:46 -0400

by: Krankenstein

Description: NV1500 Transmission out of a 96 S10, only had 55k miles when pulled, worked great but truck was totaled. Asking 100 because I really need it out of my garage.

2.5 5 speed transmission with bellhousing

Boosteds10 — Tue, 15 Mar 2011 14:01:08 -0400

by: Boosteds10

Description: I have a 5 speed transmission with the bell housing out of a 91 s10 2wd 2.5 4cyl.seems to be ok seeing as i only drove it about 50 mile. the only problem that i came across is that it "falls" out of 3rd gear. I would like to get $125 obo PM me if you are enterested

Wanted 4L60E For A 1994 S10 2WD

wacco454 — Sat, 12 Mar 2011 13:37:10 -0500

by: wacco454

Description: I need a good 4l60e for a 1994 s10 2wd it has a 4.3 motor. this is for an older couple that is on a fixes income and can't afford a lot and they need to get around I am doing the work for them for nothing. they have had the truck for a while but don't drive it much it only has 73000 miles on it and no rust. I am trying to help them out. Thanks Tom

WTB - T5 tailhousing only (Pre -1988)

Italianguy63 — Wed, 09 Mar 2011 08:58:56 -0500

by: Italianguy63

Description: WTB - T5 S-10 tailhousing with mechanical speedo. Contact Mark at Italianguy63@yahoo.com with details and price. Florida. I only need the tailhousing. Must be for mechanical speedo setup (Pre -1988). Thanks.

looking for a auto trans for a 99's10 2.2

steve223 — Fri, 04 Mar 2011 20:53:10 -0500

by: steve223

Description: Looking for a Auto Trans for a 98-01 s10 2.2l.

700r4 out of 93 typhoon trans parts

BOOSTEDSW — Fri, 25 Feb 2011 19:41:26 -0500

by: BOOSTEDSW

Description: out of my 93 typhoon #1691 w/ 56,xxxmi sine i bought it i put about 2,000 miles on it. and 2nd started slipping. it had a TransGo shift kit. one of the clips let go, and made it way to one of the pistons and cracked it which caused 2-4 band to burn up. i had a qoute done at a local trans shop to rebuild w/ all hardened and HD interals. but his labor and warranty was rediculous. but while it was there, all parts were cleaned/baked. he made a list of what parts are good that i can use/sell. well i dont really need them cause i just ordered a trans combo off TCI, :) so heres what i got and its all cleaned/baked/usuable. if need be i can get tach reading off my ty if your concerned about milage. if you dont know, the gmc typhoon and syclone came with certain parts from the corvettes to differ the shifting paterns/firmness. which are governor, valve body(converter locks-up in 3rd gear), stronger input shaft and clutch baskets. if anyone is interested in any other parts from it PM me.

WTB 4.3L 5spd trans.

01BlazerSS — Fri, 25 Feb 2011 00:12:32 -0500

by: 01BlazerSS

Description: I am looking for a 4wd 5spd for a 4.3l? I have a 4wd 5spd from a 95 4.3l for sale if anyone is interested in buying it or trading for it if they have the newer one.

Looking for 4.3 s10 auto transmission crossmember

s10studduts01s — Mon, 21 Feb 2011 19:56:02 -0500

by: s10studduts01s

Description: Let me know IF you have one

5 speed Trans w/ 4 cylinder Engine

Fizack — Fri, 18 Feb 2011 00:39:50 -0500

by: Fizack

Description: I bought the truck wrecked and using the frame and suspension and have a bigger motor to use. Trying to sell the 5 speed trans that works perfect and the 4 cylinder motor goes with it. Motor is still fully equipped and you get everything that goes with it. Only missing an alternator and a/c compressor. Need the money for my Rat Rod Project.

T-5 & T-4 B&M short throw shifter

2manycars — Thu, 10 Feb 2011 00:13:23 -0500

by: 2manycars

Description: Up for sale I have a B&M short throw shifter for an 82-95 S10, S15, Blazer, Jimmy, or Sonoma with a T-4 or T-5 transmission. Has a billet base, part number 45049, now discontinued, brand new never installed. -Paid $180 new, looking for $80 plus shipping.

WTB: NV 1500 Transmission for 98 2.2L S10

WannaBButch — Sat, 05 Feb 2011 06:09:26 -0500

by: WannaBButch

Description: Need a tranny for my 98 2.2l S10.

NV3500 2wd complete

ss454 — Thu, 03 Feb 2011 18:31:56 -0500

by: ss454

Description: I have a working NV3500 out of a RCSB 4.3 2wd truck. The truck has 170k miles but this tranmission worked fine and shifted smooth when I tore the truck down.

1997 S10 Blazer 4x4 drivetrain

ss454 — Thu, 27 Jan 2011 00:21:57 -0500

by: ss454

Description: 1997 Chevy 4 door, 4x4 Blazer 4l60, transfer case and complete frame with front and rear ends. We swapped the body of this Blazer to a 2wd because the engine was shot and the 2wd had an excellent engine and transmission but a bad body. 501-945-2557

super t-10 2wd transmission from corvette COMPLETE

r_3 — Wed, 26 Jan 2011 13:43:45 -0500

by: r_3

Description: Came out of a 74 Vette LT-1 with 70k miles on it. Not sure if its a super or standard t-10. Has bell housing, all linkages, shifter, flywheel, etc. Case was opened to make sure there were no metal fragments inside. Nice and clean.

4L60E TRANSMISSON 5K

matts94 — Tue, 25 Jan 2011 19:16:05 -0500

by: matts94

Description: 4L60E REMOVED FROM 94 LT1 ROADMASTER. WAS REBUILD ABOUT 2 YEARS AGO AND HAS ABOUT 5000 MILES ON IT. REMOVED PAN SO WILL NEED FILTER AND PAN GASKET. PICKUP ONLY. WILL FIT ANY 2WD 4L60E APPLICATION great upper grade for an s10. the b-body cars had heavier internals. was going in my s10 but im sticking with my 5speed ebay link http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250763070913&ru=http://motors.shop.ebay.com:80/__?_from=R40&_trksid=p4712.m39.l1313&_nkw=250763070913&_sacat=&_fvi=1&_rdc=1#ht_500wt_1182

1994 S10 4X4 AUTO TRANSMISSION/TRANSFER CASE

keneec — Tue, 25 Jan 2011 01:22:20 -0500

by: keneec

Description: 1994 AUTOMATIC 4X4 4.3 Z CODE TRANSMISSIOM/ TRANSFER CASE 48K MILES. MAKE ME AN OFFER KEN 262-483-5010

LT1 T-56/B&M shifter/Mcleod street twin for small block chevy/Full S-10 Swap

Tunedports10 — Thu, 06 Jan 2011 18:34:29 -0500

by: Tunedports10

Description: I am switching to a turbo 400 and selling my entire T-56 setup from my S-10. The transmission is an LT1 style T-56 that has been rebuilt last summer and has about 1000 miles on it with 2 trips to the track. All rebuild parts were purchased from D&D performance. Here is a list with retail cost from D&D for just the parts. Steel 3/4 Shift Fork---$49.00 T-56 Bronze Fork Pads 1/2 and 3/4---$70.00 Bronze Fork Pads 5/6---$35.00 Complete Syncro Rebuild Kit---$199.00 T-56 3/4 Billet Inserts---$99.00 T-56 Bearing Kit---$149.00 [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0577.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0581.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0582.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0583.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0584.jpg[/IMG] I also have a LT1 T56 to small block chevy McLeod Twin Disk clutch kit. It has the steel internally balanced 153T flywheel. This was installed after the rebuild so it also has about 1000 miles on it. The part number for it is 64033-00-07 and it retails at summit racing for $1,146.95. http://www.summitracing.com/parts/MCL-64033-00-07/ http://www.mcleodracing.com/products/St.Twin.Diaph Steel Flywheel.mcl?rsku=16409 [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0591.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0592.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0593.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0595.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0594.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0596.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0597.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0598.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0601.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0600.jpg[/IMG] The shifter is a B&M Short shifter for and LT1 Camaro. Retail price from summit racing is $189.95. http://www.summitracing.com/parts/BMM-45052/ [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0608.jpg[/IMG] The shift knob is Hurst brand and retails for $30.95 at summit racing. http://www.summitracing.com/parts/HUU-1630016/ The aluminum slave cylinder is from a 88-92 camaro T-5 transmission and was purchased through summit racing for $49.95. http://www.summitracing.com/parts/DHB-CS37821/?rtype=10 The master cylinder is from a stock 95 S-10. Retail price from summit is $52.95. http://www.summitracing.com/parts/DHB-CM126856/?rtype=10 I also have a stainless braided line to go from the master to slave cylinders. I am also including the modified cross member I used and the driveshaft that was cut to correct length for a V8 s-10 with transdapt engine swap mounts. [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0605.jpg[/IMG] [IMG]http://i33.photobucket.com/albums/d52/Tunedports10/DSCF0606.jpg[/IMG] I am asking $3000 obo for the complete swap and would prefer local pickup with cash. If you would like to have it shipped you would need to set up the truck and pay an extra $60 to palletize it. If you want to use paypal you will need to pay for the paypal fees. If interested please pm me or email me at jjball2002@hotmail.com

LT1 T-56/B&M shifter/Mcleod street twin for small block chevy/Full S-10 Swap

Tunedports10 — Thu, 06 Jan 2011 18:30:43 -0500

turbo 400 trans WTT

jburton_55 — Mon, 20 Dec 2010 17:47:10 -0500

by: jburton_55

Description: I have a Turbo 400 with 30000 miles on it and i would like to trade for a 700R4...please Pm me if interesed....

WTB 2 wheel drive axle shaft

gitsum01 — Sat, 18 Dec 2010 12:42:18 -0500

by: gitsum01

Description: had a wheel bearing go out and it dug a groove into my axle. im looking to buy a new axle shaft that will fit a 01 blazer xtreme with a 7.625 rear end. i really dont want to buy a whole rear end but let me know what you have. call (757) 320-6930 ask for larry, thanks!

WTB 98 s10 clutch pedal

tyler_calloway — Sat, 11 Dec 2010 12:46:34 -0500

by: tyler_calloway

Description: need a stock s10 clutch pedal...nothing else but the pedal and the pivot it swings on is all i need...

WTB FRONT DRIVESHAFT

mystictealz28 — Sat, 11 Dec 2010 10:57:37 -0500

by: mystictealz28

Description: Im looking for a used front drive shaft for a 1996 oldsmobile bravada. It need to be in good condition. I have paypal ready! message me here if you have one or call or text my cell phone. 719-213-9172. NEEDED ASAP Thanks Nate

built 4L60E and converter

Sleeper sonama — Fri, 10 Dec 2010 12:00:58 -0500

by: Sleeper sonama

Description: I have for sale my built 4L60E trans out of my 94s10 with 2200 to 2400 stall converter. The trans has a transpak shift kit,tci billet servo 1-2 gear shifts and a vette servo for 3-4th gear shiftsso has a tci aluminum deep trans pan holds extra 2 qt also comes with dipstick and dip stick tube. The trans was totally rebuilt when all the servos and shift kit was put in.When i got rid of the truck i pulled the trans out. Im looking to get 850 obo for the trans and converter together

WTB NV3500 2WD 5 speed tranny

p_townracer — Tue, 30 Nov 2010 02:34:28 -0500

by: p_townracer

Description: im looking all over for a 5 speed nv3500 for my 2000 s10 if u know of one for sale reasonable please contact me at 1 731 845 4832 thanks in advance i can get a brand new one with warranty for 800 even shipped so be realistic please one with 100k is not gonna be work 600 lol

New 4L60E Blazer or Camaro

SpoolinSDime — Thu, 25 Nov 2010 19:02:58 -0500

by: SpoolinSDime

Description: For sale is a GM Tranny 4L60E. The tranny has at most 1500 miles on it. It was in my friends s10 till he got t-boned. Tranny is in amazing condition. Was done by Chevy with kevlor clutches and harden sunshell, complete rebuild with everything, and has corvette servo. I bought the tranny before i took mine out and then realized i had gotten the wrong tranny. Comes with all parts and torque converter. Tranny cost 2200 new and im selling it for 1000 obo.

5-speed transmission

muleman — Sun, 21 Nov 2010 14:19:51 -0500

by: muleman

Description: 5-speed transmission out of a 2000 ZR-2. changed to auto. have all things for replacement. flywheel new clutch, pressure plate, throwout bearing. flywheel just turned and clutch is brand new, maybe 50 miles on it. also have the center console and all parts. must go, will ship to you for cost.